Adash

Sort By:  
The Vibrio M is now also avaliable in an Ex version. All basic vibrodiagnostics measurements are available: Overall Values, FFT Spectrum, Time signal, Frequency bands, Route measurement or Expert system. You can listen to the signal with the headphones supplied with every unit.
$2,970.00
The A4900 - Vibrio M instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition,identification of mechanical faults andlubricationassessment. The A4900 - Vibrio M is equipped with 4MB of memory for data storage. Data memory allows you to perform off-route and route measurements.The professional software DDS for Vibrio M can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included.
$2,970.00
Explore the most powerful Vibration Analyzer on the market – the A4500 VA5 Pro is the newest member in the Adash product range; comes with touchscreen and large display – complete with the Data Collector, Run-up Analyser, Balancer, Recorder, Stethoscope, FASIT, Lubri, Bump Test, Octave Analyser, Ultrasound, Camera, Pictures Gallery and Thermal Imaging modules. Analyze your data on site and enjoy the large screen size for playing with variable cursors, bearing fault frequencies indication and FFTs in cascade. A touchscreen and keyboard are at your service whenever you need it.
$6,200.00
VA3 Pro Ex is a professional vibration analyzer determined to protect your machinery. Build your kit according to your needs. Single or multi axis sensors, speed probe and other accessories are ready for your vibration analysis and predictive maintenance program on general.Machinery condition monitoring is a necessity also in hazardous industry environments such as mines, oil & gas, petrochemical etc. To protect human lives and equipment the devices used in such harsh areas has to be explosion proof. VA3 Pro Ex is ready at your service.
$4,270.00
VA4 Pro II is a professional 4/4 channel signal analyzer built especially for vibration analyst who has the highest expectations of their equipment. With up to 90 kHz frequency range, raw signal recording and many special measurements such as full spectrum, the VA4 Pro II fulfills all vibration analysts measurement needs.
$5,290.00
The A4300 VA3 Pro is the newest addition to our range of portable devices for vibration diagnostics. There are 2 signal inputs and 1 tacho/trigger input. Input 2 offers connectivity to a triaxial sensor, therefore all 3 channels can be measured simultaneously. The expert system developed by Adash can automatically detect machine faults such as unbalance, looseness, misalignment, and bearing faults.
$3,980.00
Adash VIBRIO M Ex A4900 Vibration Analyzer and Data Collector - NEW (VIBRIO M Ex)
The A4900 - Vibrio M Ex instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and lubrication assessment. The A4900 - Vibrio M Ex is equipped with 4 MB of memory for data storage. Data memory allows you to perform off-route and route measurements. The professional software DDS for Vibrio M Ex can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included. The A4900 – Vibrio M Ex is supplied as a complete system including quality piezoelectric sensor, magnet and coiled cable for industrial use.

Features:

All basic vibrodiagnostics measurements: Overall values, Time signal, Frequency bands, FFT Spectrum, Route measurement
4 MB memory for data storage
detects unbalance, loosenes, misalignment or bearing faults
ISO 10816-3 included
8 hours of operation
determines the condition of your bearings, including slow-running ones

SPECS :

Input: 1 x ICP® powered Ex accelerometer (AC90x or AC91x)

Input range: 60 g PEAK with standard 100 mV/g sensor

Measurements: Velocity RMS: 10 - 1 000 Hz [mm/s, ips]
Velocity PEAK: 10 - 1 000 Hz [mm/s, ips]
Acceleration RMS: 500 - 16 000 Hz [g]
Acceleration Peak: 500 - 16 000 Hz [g]
Velocity time: 1 - 1 000 Hz [mm/s, ips], 2048 samples *
Velocity spectrum: 1 - 1 000 Hz [mm/s, ips], 800 lines
Acceleration time: 1 - 16 000 Hz [g], 2048 samples*
Acceleration spectrum: 1 - 16 000 Hz [g], 800 lines*
Acceleration Demod-Envelope RMS: 500 - 16 000 Hz [g]
Acceleration Demod-Envelope Peak: 500 - 16 000 Hz [g]*
Acceleration Demod-Envelope time: 500 - 16 000 Hz [g], 2048 samples
Acceleration Demod-Envelope spectrum: 500 - 16 000 Hz [g], 800 lines,
range 400 Hz*
Displacement RMS: 2 - 100 Hz [µm, mil]
Displacement 0-Peak: 2 - 100 Hz [µm, mil]
Displacement Peak-Peak: 2 - 100 Hz [µm, mil]

Other functions: Vibration stethoscope

Memory: 4 MB for data
900 measurements of 800 line spectra or 2048 sample time signals
may be stored

Data storing: Off-Route
Route with DDS software for Vibrio M Ex (free download)

Interface: USB 2.0 compatible

Software: DDS software for Vibrio M Ex (free download)

Display: Colour graphic OLED display 128x128 pixels, diagonal 1.5“ (38 mm)

Output: 1 x AC signal 8 Ω / 0,5 W for external headphones (signal listening)

Power: 2 x AA 1.5V batteries (Energizer L91 Ultimate Lithium - 7 hours operation)

Temperature: Operating: -20°C to 50°C

Dimensions: 150 x 60 x 35 mm

Weight: 330 g including batteries (without cable, sensor and  magnet)
540 g including batteries, cable, sensor and magnet

Accessories: Ex vibration sensor (AC90x or AC91x), coiled cable to connect vibration
sensor, magnetic base for vibration sensor, headphones with 3.5 mm
jack, special USB cable, measuring tip for manual pressure on the sensor,
transport case, USB flash disc with the manual

II 2 G Ex ib IIC T4 Gb: II Non-mining
2 Zone 1
G Gas atmosphere
Ex ib Principle of protection:
 Intrinsic Safety EN 60079-11 , Zone 1
IIC Gas group - Acetylene, Hydrogen
T4 Temperature class 135°C
Gb Equipment Protection Level – Zone 1
 (high protection)

What's in the Box:

(1) Ex vibration sensor (AC90x or AC91x)
(1) Coiled cable to connect vibration sensor
(1) Magnetic base for vibration sensor
(1) Headphones with 3.5 mm jack
(1) USB cable
(1) Measuring tip for manual pressure on the sensor
(1)  Transport case
(1) USB flash disc with the manual
(2) AA 1.5V batteries

Also you can check price : Adash VIBRIO M A4900 Vibration Analyzer and Data Collector in One - NEW

The Vibrio M is now also avaliable in an Ex version. All basic vibrodiagnostics measurements are available: Overall Values, FFT Spectrum, Time signal, Frequency bands, Route measurement or Expert system. You can listen to the signal with the headphones supplied with every unit.
$2,970.00
Adash VIBRIO M A4900 Vibration Analyzer and Data Collector in One - NEW (VIBRIO M A4900)
A4900 Vibrio M is a vibration meter, data collector and analyzer. It is supplied as a complete system including quality piezoelectric sensor, magnet and coiled cable for industrial use. The A4900 – Vibrio M instrument allows you to perform all basic vibro-diagnostics measurements. It is equipped with 4 MB of memory for data storage. Data memory allows you to perform off-route and route measurements. (The instrument without memory feature is still available for lower price.) The professional software DDS for Vibrio M can be downloaded from the Adash website free of charge. Adash expert system for automatic machine fault detection is included.

Features :

All basic vibrodiagnostics measurements:
Overall values, Time signal, Frequency bands, FFT Spectrum, Route measurement
4 MB memory for data storage
detects unbalance, loosenes, misalignment or bearing faults
ISO 10816-3 included
8 hours of operation
stroboscope LED-lamp for machine check
available in intrinsically safe version A4900 Vibrio M Ex

SPECS :

Input: 1 x ICP powered accelerometer

Input range  : 60 g PEAK with standard 100 mV/g sensor
(e.g. 600 g PEAK for 10 mV/g sensor, the sensitivity is editable in the unit)

Measurements: Velocity RMS: 10 - 1 000 Hz [mm/s, ips]
Velocity PEAK: 10 - 1 000 Hz [mm/s, ips]
Acceleration RMS: 500 - 16 000 Hz [g]
Acceleration Peak: 500 - 16 000 Hz [g]
Velocity time: 1 - 1 000 Hz [mm/s, ips], 2048 samples *
Velocity spectrum: 1 - 1 000 Hz [mm/s, ips], 800 lines
Acceleration time: 1 - 16 000 Hz [g], 2048 samples*
Acceleration spectrum: 1 - 16 000 Hz [g], 800 lines*
Acceleration Demod-Envelope RMS: 500 - 16 000 Hz [g]
Acceleration Demod-Envelope Peak: 500 - 16 000 Hz [g]*
Acceleration Demod-Envelope time: 500 - 16 000 Hz [g], 2048 samples
Acceleration Demod-Envelope spectrum: 500 - 16 000 Hz [g], 800 lines,
range 400 Hz*
Displacement RMS: 2 - 100 Hz [µm, mil]
Displacement 0-Peak: 2 - 100 Hz [µm, mil]
Displacement Peak-Peak: 2 - 100 Hz [µm, mil]
Temperature non-contact measurement: 0 - 380°C (32 - 716°F)

Other functions: LED stroboscope (0.17-300 Hz, 10 - 18 000 RPM)
LED torch
Vibration stethoscope

Memory: 4 MB for data
900 measurements of 800 line spectra or 2048 sample time signals
may be stored

Data storing: Off-Route
Route with DDS software for Vibrio M (free download)

Interface: USB 2.0 compatible

Software: Free version of DDS software (limited database size)

Display: Colour graphic OLED display 128x128 pixels, diagonal 1.5“ (38 mm)

Output: 1 x AC signal 8 Ω / 0,5 W for external headphones (signal listening)

Power: 2 x AA 1.5V batteries (alkaline, NiMH, Lithium - 8 hours of operation)

Temperature: Operating: -5°C to 55°C

Dimensions: 150 x 60 x 35 mm

Weight: 330 g including batteries (without cable, sensor and  magnet)
540 g including batteries, cable, sensor and magnet

Accessories: vibration sensor, coiled cable to connect vibration sensor, magnetic base
for vibration sensor, headphones with 3.5 mm jack, USB cable, measuring
tip for manual pressure on the sensor, transport case, USB flash disc with
the manual

What’s in the Box :

(1) Vibration sensor
(1) Coiled cable to connect vibration sensor
(1) Magnetic base for vibration sensor
(1) Headphones with 3.5 mm jack
(1) USB cable
(1) Measuring tip for manual pressure on the sensor
(1)  Transport case
(1) USB flash disc with the manual
(2) AA 1.5V batteries

Also you can check : Adash A4500 VA5 Pro Vibration Analyzer - Thermal Imaging - Ultrasound - NEW

The A4900 - Vibrio M instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition,identification of mechanical faults andlubricationassessment. The A4900 - Vibrio M is equipped with 4MB of memory for data storage. Data memory allows you to perform off-route and route measurements.The professional software DDS for Vibrio M can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included.
$2,970.00
Adash A4500 VA5 Pro Vibration Analyzer - Thermal Imaging - Ultrasound - NEW (A4500 VA5 Pro)

Explore the most powerful Vibration Analyzer on the market.
Use multitasking tool in order to analyse your machinery.
Balancer, Thermal imaging camera, Ultrasound, Bump test, ODS, MCSA – you name it…

Measure 4 vibration signals and 4 process values (temperature, pressure etc.) along with speed synchronously. Triaxial sensor friendly, proximity probes for displacement measurement, ultrasound microphone, acoustic microphone, thermal imaging camera, current clamp meter, stethoscope and more.

Analyse your data on site and enjoy the big screen size for playing with variable cursors, bearing fault frequencies indication and FFTs in cascade. Touchscreen and keyboard is at your service whenever you need it.

Adash America A4500 PRO - Vibration Analyzer, VA5 Pro Package

  • FFT with UP to 3 276 800 lines
  • 90 kHz frequency range
  • Raw signal recording
  • 8 Channel signal analyzer

Enjoy a huge touchscreen to analyze your machinery on site. Measure 4 vibration signal channels and 4 process value channels (temperature, pressure etc.) along with speed synchronously. Triaxial sensor friendly, proximity probes for displacement measurement ready, balancer, octave analysis, bump test, ODS, MCSA

8 Channel Signal Analyzer

  • 4 AC inputs for vibration measurement
  • 4 DC inputs for process values measurement
  • Tacho input (speed/trigger)

Multi-Tasking Anaylzer
The VA5PRO allows you to measure more measurement types synchronously. Overall values, FFTs, Time waveforms.

You can hear it
Ultrasound microphone for leak detaction

You can see it
Thermal imaging camera

VA5 Pro specifications

Input channels:
4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACHO for speed probe/external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.35 Hz - 90 kHz (1 Ch, 194 kHz sampling)
Maximum range: 0.35 Hz - 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 0.35 Hz - 25 Hz (4 Ch, 64 Hz sampling)
Sampling mode:
Fully simultaneous for 4 channels
FFT resolution:
Min. 100 lines
Max. 3 276 800 lines
Unit modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Run up - run up and coast down measurements
Recorder - raw signal recording for later post analysis
Stethoscope - listening of the bearing/machine noise
FASIT - expert system for automatic fault detection
MCSA
Octave analyzer - hearable sound measurements
Bump test - measurement of natural frequencies
ADS - Animated Deflection Shapes (Operating deflection shapes)
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
Camera
IR Camera
Gallery
Display:
1125 x 800 pixels
Built-in camera:
5 MPx, autofocus
Thermal imaging camera (optionally):
384 x 288 pixels
-10°C ~ 150°C (or up to 250°C) temp. range
50 mK NETD sensitivity
Processor:
Intel Atom 1.9 GHz
Memory, Route:
64 GB, max. 16 GB for one route, number of routes is limited by free memory only
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Raw signal recorder:
64 kHz sampling frequency
4 Ch memory consumption 3 GB/hour
4 Ch total recording - 20 hours
Trigger:
Manual, External, Signal level, Time
Speed change, Time interval
Interface:
USB 3.0, 2.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery 8 hours of operation
Case:
IP 65 rating, aluminium heavy duty
Size & Weight:
29,5 x 23 x 4,9 cm, 1,98 kg
Languages:
English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish, Romanian, Thai

In The Box :

VA5 Vibration Analyzer
Single License of DDS Digital Diagnostics Software 2019 Software
Charger
Leather holster
Carrying strap and hard shell Profi Case
1x standard sensor
1x 6ft. coiled cable
Flat rare earth magnet


Explore the most powerful Vibration Analyzer on the market – the A4500 VA5 Pro is the newest member in the Adash product range; comes with touchscreen and large display – complete with the Data Collector, Run-up Analyser, Balancer, Recorder, Stethoscope, FASIT, Lubri, Bump Test, Octave Analyser, Ultrasound, Camera, Pictures Gallery and Thermal Imaging modules. Analyze your data on site and enjoy the large screen size for playing with variable cursors, bearing fault frequencies indication and FFTs in cascade. A touchscreen and keyboard are at your service whenever you need it.
$6,200.00
Adash A4300 VA3 Pro Ex Vibration Analyzer - NEW (A4300 VA3 Pro Ex)
VA3 Pro Ex is a professional vibration analyzer determined to protect your machinery. Build your kit according to your needs. Single or multi axis sensors, speed probe and other accessories are ready for your vibration analysis and predictive maintenance program on general.

Machinery condition monitoring is a necessity also in hazardous industry environments such as mines, oil & gas, petrochemical etc. To protect human lives and equipment the devices used in such harsh areas has to be explosion proof. VA3 Pro Ex is ready at your service.

VERSATILITY & CONNECTIVITY
VA3 Pro Ex

3x AC input – vibrations
3x DC input – process values
1x Trigger input (speed probe)
Triaxial sensor readyIR temperature sensor
LED stroboscope / flashlight
Fast USB 2.0 communication
Robust Push-Pull connectors

Collect & Import

VA3 Pro Ex along with free DDS software can measure and store two basic measurements. Acceleration in g for the bearing condition and Velocity in mm/s (or ips) for the whole machine body condition.

Collect the data with VA3 Pro Ex regularly and import them into free DDS software. Follow vibration trends and observe the actual condition of your machines.

VA3 Pro Ex specifications

Ex certification:
II 3G Ex ic op is IIC T3 Gc
Input channels:
3 x AC, ICP® power supply on/off
3 x DC for process values
1 x TACHO for speed probe / external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.5 Hz - 25 kHz (64 kHz sampling)
Minimum range: 0.5 Hz - 25 Hz (64 Hz sampling)
Sampling mode:
Fully simultaneous for all 3 channels
FFT resolution:
Min. 25 lines
Max. 25 600 lines
Measurement modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Recorder - raw signal recording for later post analysis
Run Up - run up and coast down measurements
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
LED stroboscope, LED torch
FASIT - Expert system for automatic fault detection
Vibration meter - basic vibration measurements
Software:
Free version of DDS software (limited database size)
Licensed DDS software
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
IR temperature measurement:
From -70˚C to 380˚C (-94˚F to 716˚F)
Trigger:
Manual, External, Amplitude, Tacho
Display:
Colour 240 x 320 pixels, TFT
Interface:
USB 2.0, 3.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery pack for more than 6 hours of continous operation
Case:
Aluminium - heavy duty
Weight:
780 g
Dimensions:
230 x 82 x 32 mm
Languages:
Languages: English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish


VA3 Pro Ex is a professional vibration analyzer determined to protect your machinery. Build your kit according to your needs. Single or multi axis sensors, speed probe and other accessories are ready for your vibration analysis and predictive maintenance program on general.Machinery condition monitoring is a necessity also in hazardous industry environments such as mines, oil & gas, petrochemical etc. To protect human lives and equipment the devices used in such harsh areas has to be explosion proof. VA3 Pro Ex is ready at your service.
$4,270.00
Adash A4400 VA4 Pro II Vibration Analyzer - NEW (A4400 VA4 Pro II)
The A4400 instrument contains these measurement modes:
  • Data Collector (Route measurements)
  • Balancer
  • Signal Recorder


FFT spectrum with 25 600 lines

  • Extremely fast data acquisition
  • 4 channel simultaneous measurement of AC signals with tachometer
  • 4 DC channels for process measurements
  • Balancing Advisor helps you with balancing
  • New intuitive graphics interface for balancing


Measurement of 4 channel simultaneously gives a lot of flexibility in fault diagnosis. For instance, you can get a good insight of the alignment by measuring the radial and axial vibration across the coupling of the motor and pump.

120Gb allows 35 hours continuous recording of 4 channel raw signals up to 25.6kHz, so you can make the diagnosis later; and won't miss any transient behavior of the machine.

Simultaneous Measurement

Multi-measurements can be measured in parallel for a single measurement point, which save time; and improve consistency in data especially when the machine speed or running condition varies with time.

Example of multi-measurements:

  • Overall Velocityaccording to ISO-2732
  • Time signal (1k high pass filtered) for inspection of impacts due to bearing fault
  • FFT spectrum 0-20kHz, 25,600 lines
  • Envelope Spectrum

Balancing

  • A4400 VA4 Pro provides professional 2-plane balancing function.
  • The whole balancing process will be guided on screen with easy-to-understand figures and instructions.
  • The weights will be automatically split and calculated for situations where the location of weights is limited, e.g. fan.

Data Collector

A4400 VA4Pro can be used as a Data Collector for routine data collection.

Parallel Measurements are performed simultaneously, that save time in data collection at each measurement point. It also improve consistency of data especially when the speed or process condition of the machine varies with time.

For experienced user, historical data can be downloaded for on-site trending and comparison, so that diagnosis can made on spot immediately.

Run-up / Coast Down

Run-up / Coast-down can be easily carried out on A4400 VA4Pro. Raw time data can also be recorded as a backup for critical machine. 4 DC Process Parameters can be measured at the same time for correlation analysis with vibration readings.

Different graph is available for run-up / coast-down analysis:

  • Bode plot (amplitude and phase vs. rpm)
  • Nyguist plot
  • Waterfall plot
  • Cascade plot

Software DDS 2010

One software for all instruments!

The Adash Ltd. keeps one rule all the time from 1991. The measured data from any instrument (portable or on-line) are saved in one data format to the database. It enables to use just one data acquisition software. The software system DDS 2011 contains all functions, which are necessary for next data analysis.

Main features:

  • Free updates available on our website
  • Bearing database (about 30 000 bearings)
  • High speed data processing
  • Reporting
  • Large databases
  • SQL server support
  • LAN connection
  • Technical support directly with the manufacturer

The Adash A4400 VA4 Pro CMS PRO Balance Kit includes functionality for Data Collection, Run-up Analyzer, Balancer, Recorder, FASIT, Stethoscope, Lubri and Octive Analyzer in one unit! System includes:

  • (1) A4400 VA4 Pro instrument
  • (2) Accelerometer
  • (2) Coiled cables
  • (2) Magnetic base sets
  • (1) Battery Charger
  • (1) Laser Tacho Stobe, mag base, cable, reflective tape
  • (1) Shoulder strap
  • (1) Transport case
  • (1) User Manual
  • (1) DDS 2011 Pro Software package
  • (1) Bearing Data Base
  • (1) A4400 Data Interface Software


VA4 Pro II specifications

Input channels:
4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACHO for speed probe/external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.35 Hz - 90 kHz (1 Ch, 194 kHz sampling)
Maximum range: 0.35 Hz - 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 0.35 Hz - 25 Hz (4 Ch, 64 Hz sampling)
Sampling mode:
Fully simultaneous for 4 channels
FFT resolution:
Min. 100 lines
Max. 3 276 800 lines
Unit modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Run up - run up and coast down measurements
Recorder - raw signal recording for later post analysis
Stethoscope - listening of the bearing/machine noise
FASIT - expert system for automatic fault detection
Octave analyzer - hearable sound measurements
Bump test - measurement of natural frequencies
ADS - Animated Deflection Shapes (Operating deflection shapes)
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
Display:
1140 x 800 pixels
Processor:
Intel Atom 1.9 GHz
Memory, Route:
64 GB, max. 16 GB for one route, number of routes is limited by free memory only
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Raw signal recorder:
64 kHz sampling frequency
4 Ch memory consumption 3 GB/hour
4 Ch total recording - 20 hours
Trigger:
Manual, External, Signal level, Time
Speed change, Time interval
Interface:
USB 3.0, 2.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery 8 hours of operation
Case:
Aluminium heavy duty
Size & Weight:
280 x 205 x 55 mm, 2200 g
Languages:
English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish, Romanian, Thai


VA4 Pro II is a professional 4/4 channel signal analyzer built especially for vibration analyst who has the highest expectations of their equipment. With up to 90 kHz frequency range, raw signal recording and many special measurements such as full spectrum, the VA4 Pro II fulfills all vibration analysts measurement needs.
$5,290.00
Adash A4300 VA3 Pro Vibration Analyzer , Data Collector - NEW (A4300 VA3 Pro)
The A4300 VA3 Pro is the newest addition to our range of portable devices for vibration diagnostics. There are 2 signal inputs and 1 tacho/trigger input. Input 2 offers connectivity to a triaxial sensor, therefore all 3 channels can be measured simultaneously. The expert system developed by Adash can automatically detect machine faults such as unbalance, looseness, misalignment, and bearing faults.
 
There is a non-contact IR temperature sensor (for immediate bearing temperature measurement) and a LED stroboscope/torch. The A4300 VA3 Pro is designed for one-handed operation. With a weight of just 780g and a battery life of more than 10 hours of operation, the unit is suitable for long route measurements.
 
The A4300 VA3 Pro instrument can be configured according to your requirements by choosing optional modules: analyzer, route, balancer, recorder, run up, or ultrasound.

VA3 Pro specifications

Input channels:
3 x AC, ICP® power supply on/off
3 x DC for process values
1 x TACHO for speed probe / external trigger
Input range:
AC /- 12 V peak-peak
DC /- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.5 Hz - 25 kHz (64 kHz sampling)
Minimum range: 0.5 Hz - 25 Hz (64 Hz sampling)
Sampling mode:
Fully simultaneous for all 3 channels
FFT resolution:
Min. 25 lines
Max. 25 600 lines
Measurement modes:
Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Recorder - raw signal recording for later post analysis
Run Up - run up and coast down measurements
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
LED stroboscope, LED torch
FASIT - Expert system for automatic fault detection
Vibration meter - basic vibration measurements
Software:
Free version of DDS software (limited database size)
Licensed DDS software
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
IR temperature measurement:
From -70˚C to 380˚C (-94˚F to 716˚F)
Trigger:
Manual, External, Amplitude, Tacho
Display:
Colour 240 x 320 pixels, TFT
Interface:
USB 2.0, 3.0 compatible
Operating temperature range:
-10˚C to 50˚C
Power:
Battery pack for more than 10 hours of continous operation
Case:
Aluminium - heavy duty (optionally with IP65 rating)
Weight:
780 g
Dimensions:
230 x 82 x 32 mm
Languages:
Languages: English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish

In The Box

A4300 VA3 Vibration Meter
Charger
Leather holster
Carrying strap
Hard shell Profi Case
One standard sensor
One 6ft. coiled cable
Flat rare earth magnet
Order additional software modules, cables and accessories as needed


The A4300 VA3 Pro is the newest addition to our range of portable devices for vibration diagnostics. There are 2 signal inputs and 1 tacho/trigger input. Input 2 offers connectivity to a triaxial sensor, therefore all 3 channels can be measured simultaneously. The expert system developed by Adash can automatically detect machine faults such as unbalance, looseness, misalignment, and bearing faults.
$3,980.00
Per Page      1 - 6 of 6
  • 1
Back to top