CEIA
High detection sensitivity of magnetic and non-magnetic low metal content mines in all soil conditions; enhanced IED detection of targets such as electrical conductive, non-metallic devices (i.e. graphite switches), short wires and high resistivity metals; command wire detection of conductors of any diameter and type with no nuisance alarms due to other metal targets and clutter
The CEIA CMD is a very high performance, high-sensitivity Compact Metal Detector designed to detect metal and minimum-metal content targets in all types of terrain. Pinpointing of the metal objects is aided by an evolved system of acoustic modulation and an LED bar indicator, which allow the position of the detected mass to be established with a high degree of precision. The detector is manufactured in compliance with the ISO-9001 standard and has been designed to satisfy the most stringent operational requirements in any application field.
New CEIA CMD V3 Metal Detector - Sale !! (CMD V3)
High detection sensitivity of magnetic and non-magnetic low metal content mines in all soil conditions; enhanced IED detection of targets such as electrical conductive, non-metallic devices (i.e. graphite switches), short wires and high resistivity metals; command wire detection of conductors of any diameter and type with no nuisance alarms due to other metal targets and clutter
CMD3 consists of a search head, a control unit, a telescopic pole and an elbow support jointed together in a one-piece design. The detection head is light and the cabling is protected from any possible damage.
The one-piece foldable design allows the CMD3 to be operational in a very short time and easily carried everywhere.
The Detector offers the best combination of functional and operational characteristics: it provides the highest ratio between overall dimensions, detection performance and operational weight.
CMD3 does not require any manual calibration; in addition, optimum sensitivity is ensured over all types of terrain due to CEIA’s Exclusive Automatic Soil Compensation System.
Localization of the threats is assisted by an Acoustic Modulation pinpointing system aided by Visual LED bar-graphs, which allows the position of the detected item to be identified accurately.
Integrated GPS and data logging system for traceability and quality control of clearance operation.
Command Wire detection capability independent from the orientation of the search head.
Visual signalling selectable as visible or infrared mode (compatible with night vision devices).
Operable up to one meter distance from detector to detector.
Battery level monitoring with notice before complete discharge.
FEATURES :
SPECIFICATION :
CMD3 consists of a search head, a control unit, a telescopic pole and an elbow support jointed together in a one-piece design. The detection head is light and the cabling is protected from any possible damage.
The one-piece foldable design allows the CMD3 to be operational in a very short time and easily carried everywhere.
The Detector offers the best combination of functional and operational characteristics: it provides the highest ratio between overall dimensions, detection performance and operational weight.
CMD3 does not require any manual calibration; in addition, optimum sensitivity is ensured over all types of terrain due to CEIA’s Exclusive Automatic Soil Compensation System.
Localization of the threats is assisted by an Acoustic Modulation pinpointing system aided by Visual LED bar-graphs, which allows the position of the detected item to be identified accurately.
Integrated GPS and data logging system for traceability and quality control of clearance operation.
Command Wire detection capability independent from the orientation of the search head.
Visual signalling selectable as visible or infrared mode (compatible with night vision devices).
Operable up to one meter distance from detector to detector.
Battery level monitoring with notice before complete discharge.
FEATURES :
- High detection sensitivity of magnetic and non-magnetic low metal content mines in all soil conditions
- Enhanced IED detection of targets such as electrical conductive, non-metallic devices (i.e. graphite switches), short wires and high resistivity metals
- Command wire detection of conductors of any diameter and type with no nuisance alarms due to other metal targets and clutter
- Separate acoustic, visual and tactile alarm signalling for each class of target
- High immunity against external interferences, (i.e. portable transceivers, power lines or generators) and capability to operate within the coverage of ECM Jammers
- Compact and lightweight DESIGN ideal for rapid deployments with minimum storage space required
- Superior adaption to all types of soils even if heavily mineralized and magnetic
SPECIFICATION :
Promptness
- Switch-on time: 5 sec.
- Set-up time: less than 20 sec.
- Soil Compensation: 16 sec.
- Reset: 1.5 sec. with automatic reset feature
Dimensions
- Search head (W x L): 140 mm x 350 mm
- Folded: 390 mm x 160 mm x 85 mm
- Fully extended: 1300 mm
- Carry bag: 395 mm x 205 mm x 130 mm
Weight
- Detector (batteries included): 2.25 kg
- Carry bag: 0.6 kg
- Earphone: 0.155 kg
Protection degree (IEC 60529)
- IP 68 (waterproof to 2 m for 24 hours)
Environmental data
- Storage temperature: -55°C to 85°C
- Operating temperature: -46°C to 70°C
Conformity
- Complies with the international standards on radio interference and human exposure to electromagnetic fields
- MIL-STD-810 Compliant
- STANAG 4370 Compliant
Battery
- 3 x 1.2V Ni-MH C cells - HR14
- 3 x IEC size LR14
Battery charge time
- 3.5 h (with built-in battery charger)
Battery life
- More than 8 h (continuous use) with the rechargeable batteries provided by CEIA
Battery cycle life
- 2 years of daily use (= 500 cycles)
External ac/dc adapter
- 100-240 Vac (50/60Hz) - 25 W
Embedded smart battery charger
- Fast charging time: ‹ 3.5 hours full charge
Technical and operational courses
CEIA provides complete support for technical and operational courses, given by certified personnel, either on site or at its own premises:- First and second line maintenance
- Operator training
- Trainer-training programs
High detection sensitivity of magnetic and non-magnetic low metal content mines in all soil conditions; enhanced IED detection of targets such as electrical conductive, non-metallic devices (i.e. graphite switches), short wires and high resistivity metals; command wire detection of conductors of any diameter and type with no nuisance alarms due to other metal targets and clutter
New CEIA DSMD Metal Detector - Sale !! (DSMD)
The CEIA DSMD is an active electromagnetic induction (EMI) device based on the transmission of an alternated, low frequency magnetic field and the reception of the variations caused by buried metal masses.
The CEIA DSMD is an active electromagnetic induction (EMI) device based on the transmission of an alternated, low frequency magnetic field and the reception of the variations caused by buried metal masses.
It is designed for the accurate detection of deeply buried medium-large metal masses, including unexploded ordnance, whilst discriminating against ground magnetic anomalies and metal fragmentation.
The detector comprises a telescopic tube and two probe-antennae which transmit and receive the magnetic field, mounted at the ends of the extensions.
Target indication is by a high-readability colour TFT display on the front panel of the control unit and an acoustic warning signal with adjustable volume control.
The embedded GPS receiver allows real-time data logging capability during operations: GPS information (Date, Time, Latitude, Longitude) can be recorded along with significant points and data, stored into a non-volatile memory at a rate of one event per second.
DGNSS
High Accuracy GNSS Differential Geolocation System
The CEIA DGNSS is a Differential Global Navigation Satellite System for use with CEIA DSMD Metal Detectors, allowing the combined recording of differential georeferencing data, with centrimetic precision, and metal detector output signal strength on an embedded memory. Upon search operations completion, all recorded data can be exported to a PC system for postprocessing, map overlaying, screen visualization and mass storage recording.
FEATURES :
The CEIA DSMD is an active electromagnetic induction (EMI) device based on the transmission of an alternated, low frequency magnetic field and the reception of the variations caused by buried metal masses.
It is designed for the accurate detection of deeply buried medium-large metal masses, including unexploded ordnance, whilst discriminating against ground magnetic anomalies and metal fragmentation.
The detector comprises a telescopic tube and two probe-antennae which transmit and receive the magnetic field, mounted at the ends of the extensions.
Target indication is by a high-readability colour TFT display on the front panel of the control unit and an acoustic warning signal with adjustable volume control.
The embedded GPS receiver allows real-time data logging capability during operations: GPS information (Date, Time, Latitude, Longitude) can be recorded along with significant points and data, stored into a non-volatile memory at a rate of one event per second.
DGNSS
High Accuracy GNSS Differential Geolocation System
The CEIA DGNSS is a Differential Global Navigation Satellite System for use with CEIA DSMD Metal Detectors, allowing the combined recording of differential georeferencing data, with centrimetic precision, and metal detector output signal strength on an embedded memory. Upon search operations completion, all recorded data can be exported to a PC system for postprocessing, map overlaying, screen visualization and mass storage recording.
FEATURES :
- Effective detection of magnetic and non-magnetic UXO and cluster munitions
- Superior detection depth
- High discrimination against shallow metal clutter
- Automatic soil compensation for every type of terrain
- Modular design with minimal assembly time required
- Completely digital electronics, with in-field program memory upgrade capability
- Embedded GPS and inertial navigation system
- Automatic position and detection data logging for Quality Control
- Static and dynamic detection, independent of the detector’s rate of advance
- Operation monitored by graphical interface and a microcomputer-controlled auto diagnostic system with audible, optical and vibration warning signals
- Fast integrated battery charger
The CEIA DSMD is an active electromagnetic induction (EMI) device based on the transmission of an alternated, low frequency magnetic field and the reception of the variations caused by buried metal masses.
Used CEIA DSMD Underground Metal Detector - Sale !! (DSMD)
The CEIA DSMD is an active electromagnetic induction (EMI) device based on the transmission of an alternated, low frequency magnetic field and the reception of the variations caused by buried metal masses.
It is designed for the accurate detection of deeply buried medium-large metal masses, including unexploded ordnance, whilst discriminating against ground magnetic anomalies and metal fragmentation.
The detector comprises a telescopic tube and two probe-antennae which transmit and receive the magnetic field, mounted at the ends of the extensions.
Target indication is by a high-readability colour TFT display on the front panel of the control unit and an acoustic warning signal with adjustable volume control.
The embedded GPS receiver allows real-time data logging capability during operations: GPS information (Date, Time, Latitude, Longitude) can be recorded along with significant points and data, stored into a non-volatile memory at a rate of one event per second.
DGNSS
High Accuracy GNSS Differential Geolocation System
The CEIA DGNSS is a Differential Global Navigation Satellite System for use with CEIA DSMD Metal Detectors, allowing the combined recording of differential georeferencing data, with centrimetic precision, and metal detector output signal strength on an embedded memory. Upon search operations completion, all recorded data can be exported to a PC system for postprocessing, map overlaying, screen visualization and mass storage recording.
FEATURES :
It is designed for the accurate detection of deeply buried medium-large metal masses, including unexploded ordnance, whilst discriminating against ground magnetic anomalies and metal fragmentation.
The detector comprises a telescopic tube and two probe-antennae which transmit and receive the magnetic field, mounted at the ends of the extensions.
Target indication is by a high-readability colour TFT display on the front panel of the control unit and an acoustic warning signal with adjustable volume control.
The embedded GPS receiver allows real-time data logging capability during operations: GPS information (Date, Time, Latitude, Longitude) can be recorded along with significant points and data, stored into a non-volatile memory at a rate of one event per second.
DGNSS
High Accuracy GNSS Differential Geolocation System
The CEIA DGNSS is a Differential Global Navigation Satellite System for use with CEIA DSMD Metal Detectors, allowing the combined recording of differential georeferencing data, with centrimetic precision, and metal detector output signal strength on an embedded memory. Upon search operations completion, all recorded data can be exported to a PC system for postprocessing, map overlaying, screen visualization and mass storage recording.
FEATURES :
- Effective detection of magnetic and non-magnetic UXO and cluster munitions
- Superior detection depth
- High discrimination against shallow metal clutter
- Automatic soil compensation for every type of terrain
- Modular design with minimal assembly time required
- Completely digital electronics, with in-field program memory upgrade capability
- Embedded GPS and inertial navigation system
- Automatic position and detection data logging for Quality Control
- Static and dynamic detection, independent of the detector’s rate of advance
- Operation monitored by graphical interface and a microcomputer-controlled auto diagnostic system with audible, optical and vibration warning signals
- Fast integrated battery charger
The CEIA DSMD is an active electromagnetic induction (EMI) device based on the transmission of an alternated, low frequency magnetic field and the reception of the variations caused by buried metal masses.
New CEIA CMD Metal Detector - Sale !! (CMD)
The CEIA CMD is a very high performance, high-sensitivity Compact Metal Detector designed to detect metal and minimum-metal content targets in conductive and non-conductive soils, including laterite and magnetite. Pinpointing of the metal objects is aided by an evolved system of acoustic modulation and an LED bar indicator.
The one-piece foldable design allows the CEIA CMD Metal Detector to be operational in a very short time and to be carried easily everywhere.
The detector is equipped with a built-in Ni-MH battery charger which allows the batteries to be recharged (in 3 hours. max) without the need to extract them from the unit. This also allows full environmental protection of components and maximum operational speed for the user.
The Metal Detector offers the best combination of functional and operational characteristics. More specifically, it provides the highest ratio between overall dimensions, detection depth and operational weight.
The length of the telescopic pole can be adjusted for operation in upright, kneeling or prone positions.
Localization of metal objects is optimized by an Acoustic Modulation pinpointing system aided by a Visual LED bar graph, which allows the position of the detected mass to be identified accurately.
If desired, the led bar can be masked with a snapdown cover so as to avoid remote visibility (stealth operations).
The curriculum includes first and second line maintenance, training for operators and a course for operator instructors:
All controls are within easy reach of the operator:
One-piece foldable design
The Metal Detector consists of a search head, a control unit, a telescopic pole and an elbow support jointed together in a one-piece design. The detection head is light and the wiring is designed to be protected from any possible damage.The one-piece foldable design allows the CEIA CMD Metal Detector to be operational in a very short time and to be carried easily everywhere.
The detector is equipped with a built-in Ni-MH battery charger which allows the batteries to be recharged (in 3 hours. max) without the need to extract them from the unit. This also allows full environmental protection of components and maximum operational speed for the user.
Ergonomic operation
Intentionally designed to be used easily and comfortably in every working condition, the CEIA CMD can be set up for operation in less than twenty seconds.The Metal Detector offers the best combination of functional and operational characteristics. More specifically, it provides the highest ratio between overall dimensions, detection depth and operational weight.
The length of the telescopic pole can be adjusted for operation in upright, kneeling or prone positions.
Exclusive Automatic Soil Compensation System
The CEIA CMD does not require any manual calibration; in addition, optimum sensitivity is ensured over all types of terrain due to CEIA’s Exclusive Automatic Soil Compensation System.Localization of metal objects is optimized by an Acoustic Modulation pinpointing system aided by a Visual LED bar graph, which allows the position of the detected mass to be identified accurately.
If desired, the led bar can be masked with a snapdown cover so as to avoid remote visibility (stealth operations).
Complete support for technical and operational courses
CEIA provides complete support for technical and operational courses, given by certified personnel, either on site or at its own premises.The curriculum includes first and second line maintenance, training for operators and a course for operator instructors:
- In country training and assistance
- Proprietary software tools for remote control and oscilloscope features
- Multilingual telephone and online assistance
- Hardware and software upgrade
- Field Programming Key for in-the-field software upgrade
Modern Control Unit
The watertight control unit and search head withstand the most stringent environmental requirements and Standards.All controls are within easy reach of the operator:
- Volume adjustment
- Sensitivity adjustment
- Luminous bar indicator of signal intensity
- Built-in speaker
- Main switch and spring actuated reset switch
- Battery charger status indicator
- Snap-down cover to mask the led bar indicator
- Headphone connector - RS-232 interface
Technical data
- Power supply
- Types of batteries (2x), ANSI Standard, type C
- 1.2V Ni-MH rechargeable
- 1.5V Alkaline (LR14)
- Types of batteries (2x), ANSI Standard, type C
- Battery life
- Battery life at 20°C (default search program):
- with alkaline batteries: 6 hours
- with Ni-MH (6000 mAh) rechargeable batteries: 8 hours
- Battery charge indicator
- Battery life at 20°C (default search program):
- Metal alarm
- Adjustable sensitivity
- Audible alarm with adjustable volume and visual LED display (maskable with a snap-down cover)
- Dimensions
- Search head: 350 x 140 mm
- Folded: 387 x 157 x 76 mm
- Fully extended: 1290 mm
- Carry bag: 395 x 200 x 110 mm
- Weight
- Metal Detector (without batteries): 1,98 kg
- Batteries included: 2,1 kg
- Carry bag: 540 g
- Headphone: 170 g
- Environmental
- Storage temperature: -55 °C to 85 °C
- Operational temperature: -46 °C to 70 °C
- Meeting and exceeding the relevant environmental Standards
- Level of protection
- IP68 (IEC 529)
- Carry bag in water resistant synthetic canvas
- Set-up time
- Twenty seconds typical (batteries already in place)
- Built-in Battery Charger Power Supply
- 90-260V~ power supply adapter
- 12/24Vdc power supply fitted with a vehicle cigarette lighter plug
- Options
- External loudspeaker
- Rigid transport case
- NATO Number
- 6665-15-1805234
The CEIA CMD is a very high performance, high-sensitivity Compact Metal Detector designed to detect metal and minimum-metal content targets in all types of terrain. Pinpointing of the metal objects is aided by an evolved system of acoustic modulation and an LED bar indicator, which allow the position of the detected mass to be established with a high degree of precision. The detector is manufactured in compliance with the ISO-9001 standard and has been designed to satisfy the most stringent operational requirements in any application field.
- 1