OKM

This top-of-the-line detector from OKM is easy to handle via touch screen. It can detect lost treasures (coins, rings, jewelry etc.) as well as void structures (tunnels, caves, chambers, etc.). The detector is also equipped with an innovative LED orbit, that indicates underground targets visually. While scanning the ground this LED sphere emits colored light to visualize detected metals and cavities.

Factory Included Accessories

• Control Unit
• Carrying Tube
• Windows Tablet PC
• USB Bluetooth Dongle
• 3D Software (Visualizer 3D)
• Super Sensor with LED Orbit
• Standard Probe with LED Orbit
• Wireless Headphones (Bluetooth)
• Waterproof and Shock Resistant Peli Case
• Power Pack Incl. Charger and Travel Adapter

Metal Detector, Treasure Detector and 3D Ground Scanner Rover C4

Rover C4 Metal Detector with LED Orbit The Rover C4 ground scanner with innovative LED orbit is the perfect tool for treasure hunters. The color LEDs visualize existing underground treasures immediately.	Simple Touch Screen Operation The Rover C4 is operated via touch screen. Alternative hardware buttons can also be used to select options and operating modes.

This treasure detector is easy to handle via touch screen. It can detect lost treasures (coins, rings, jewelry etc.) as well as void structures (tunnels, caves, chambers, sepulchers etc.). The detector is also equipped with an innovative LED orbit, that indicates underground targets visually. While scanning the ground this LED sphere emits colored light to visualize detected metals and cavities.

Ground Scanning with Metal Detector Rover C4

One of the most versatile operating modes in our 3d metal detectors is Ground Scan. This function is used to scan a rectangular area to obtain measuring data from underground structures and objects.

Well Packed Treasure Detector The Rover C4 treasure detector is well packed in a strong Pelican case for any outdoor treasure hunting.	Ground Scanning with Rover C4 By walking over an unknown area and recording scan data, the treasure hunter can detect underground treasures and buried artifacts.

Detectable items that can be found with our 3d ground scanner Rover C4 are:

• Natural Gold Minerals
  - Gold Ore, Gold Deposits, Gold Veins, etc.

• Underground Voids and Cavities
  - Tunnels, Graves, Chambers, Cellars, Sepulchers, Dugouts, Shelters, Bunkers, etc.

• Lost Treasures and Hidden Precious Metals
  - Treasure Chests, Gold Coins, Jewelry, Silverware, Statues, General Valuables, Buttons, Medals, etc.

By walking over the field in a certain manner (Parallel or Zig-Zag) the treasure hunter scans the area of interest. With all recorded data the Visualizer 3D software creates a 3d image that represents all detected underground objects. Thus you know where and how deep the located treasures are in the ground.

3D Data Analysis with Visualizer 3D Software

All data that has been recorded with the Rover C4 metal detector during a ground scan or mineral scan can be transferred to the Visualizer 3D software to process a detailed three-dimensional analysis.

Data Analysis with Visualizer 3D Software After conducting a ground scan, simply transfer the recorded data to OKM's proprietary Visualizer 3D software.	Determine Position and Depth The Visualizer 3D software is capable to determine position, depth and dimensions of buried artifacts.

During this analysis you can:

• Calculate Object Dimensions
  - Next to the depth information Visualizer 3D can also calculate the dimensions of hidden targets and buried items

• Determine Position and Depth
  - Software shows position of the detected anomalies and - according to the chosen soil - how deep the target is buried in the ground
• Identify Potential Objects and Hidden Treasures
  - You will see the targets represented by different colors. The color information will tell you if it is a ferrous metal (iron, steel, etc.), precious metal (gold, silver, bronze, copper, etc.) or a void structure (cave, tunnel, grave, chamber, etc.)

Control unit

• Dimensions (H x W x D): 390 x 300 x 140 mm
• Weight: about 1.5 kg
• Input voltage (max.): 19 V DC, 3.16 A, 60 W
• Processor / Main CPU: Cortex M3, 32 MHz
• Processor / Slave CPU: Cortex M0, 24 MHz
• Display: 3.5” Resistive touch, 480 x 320 Pixel
• Display CPU: Cortex M3, 32 MHz, 128 KB RAM
• Data memory: 4 GB
• Sample rate: 1024 values / second
• Measurement resolution: 16 bit
• Operating temperature: –10°C – 60°C
• Storage temperature: –20°C – 70°C
• Audio: Internal speaker / Bluetooth
• Waterproof: No
• Air humidity: 5% – 75%

Standard Probe

• Weight: 0.4 kg
• Length: 445 mm
• Diameter tube / LED Orbit: 35 mm / 65 mm
• Technology: SCMI-15-D

Super Sensor

• Weight: 0.9 kg
• Length: 960 mm
• Diameter tube / LED Orbit: 50 mm / 65 mm
• Technology: SCMI-15-D

Data transmission

• Technology: Bluetooth 5.1
• Frequency: 2.402 – 2.480 GHz
• Maximum Transfer Rate: 1 Mbps
• Maximum Transmitting Power: 8 dBm
• Maximum Range: approx. 10 m

Computer minimum requirements

• Interface (data transmission): USB 2.0
• Free disk space: 250 MB
• Working memory (RAM): 2 GB
• Display: 1920 x 1080
• Processor: 1.2 GHz
• Graphics card: 1 GB RAM, OpenGL 3.3
• Operating system: Windows 10

3D Ground Scanner for Treasure Hunters and Gold Seekers with Horizontal GPR Antennas (all sizes), Tunnel and Cavity Antenna and FS-Thermoscan

The eXp 4500 ground scanner is a high performance metal detecting device which is specially designed for Archaeological 3D surveys, metal detection, treasure hunting and gold prospection. The OKM eXp 4500 Professional Plus Edition of the eXp 4500 metal detector is for professional searching needs and includes all available options. All available probes and antennas like the horizontal GPR antennas (all sizes), the tunnel and cavity antenna as well as the FS-Thermoscan for infrared measurements are included.

Features:

• Warranty : 2 Year Limited
• Total Weight : 2.9 lbs (1.35 kgs)
• Voltage : 12 - 14.4 VDC, 22 W Max
• Data Transmission Technology : USB
• Processor : 800 MHz, INTEL i586-Compatible

Powerful Treasure Hunting Ground Scanner with 3D Scan Images

Characteristics and Applications of the eXp 4500 Ground Scanner

The eXp 4500 ground scanner is a high performance metal detecting device which is specially designed for the following applications:

• Tunnels, voids and cavern locating
• 3D imaging including size and depth
• Mineral and natural gold prospecting
• Detecting gold and other items of great value
• Pin pointer function to locating the exact position of buried treasures and artifacts
• Archaeological 3D surveys, metal detection, treasure hunting and gold prospecting
• Finding ancient artifacts, hidden treasures, gold, silver, bronze, hoards of coins, treasure deposits, pirate chests

With several specialized detection antennas, the eXp 4500 ground scanner can also be used in highly mineralized areas for treasure hunting and prospecting.

The measurement unit of the eXp 4500 includes a PC-module with which data is displayed immediately on the full color screen. During the scanning procedure a laptop computer is not required, you see the results directly on the screen in real time as it is recorded. Advanced technology allows measurements in brilliant resolutions. Measured data is stored in the internal memory and can be transferred later to a computer. Transferring measured values to a computer allows the operator to evaluate and compare all stored data. In doing this the operator can determine depth, size and position of targets using the professional Visualizer 3D software.

Operating Modes of the eXp 4500 Ground Scanner and Metal Detector:

Hidden artifacts are of different sizes and made from different materials. So the treasure hunter needs different operating modes and locating methods to find all of those hidden treasures at various depths under the ground surface. The eXp 4500 ground scanner is capable of the following operating modes:

• Magnetometer: helpful to locate ferrous metals like iron and steel
• Pin Pointer: assists you in locating the correct position of detected items
• Tunnel Scan: specialized mode to detect underground voids, tunnels, cavities and hollow spaces
• Mineral Scan: has been integrated for gold prospectors, seekers and miners, who are looking for natural gold and minerals
• Thermo Graph and Thermo Scan: used to detect cavities and underground tunnels by measuring differences in temperature
• Ground Scan: ideal for treasure hunters and archaeologists looking for underground artifacts, treasures as well as historical and archaeological items

Technical Specifications:

• 2 Year Warranty
• Control Unit
• Waterproof : No
• Safety Class : IP40
• Data Memory : 256 MB
• Air Humidity : 5 % - 75 %
• Weight : 2.9 lbs (1.35 kgs)
• Feedback : Audible, Visual
• Working Memory : 256 MB RAM
• Voltage : 12 - 14.4 VDC, 22 W Max
• Processor : 800 MHz, INTEL i586-Compatible
• Storage Temperature : -4° F - 140° F (-20° C - 60° C)
• Operating Temperature : 32° F - 158° F (0° C - 70° C)
• Dimensions (H x W x D) : 8" x 6" x 11" (220 x 160 x 295 mm)
• Display : 300mcd Backlight, 6.4" Diagonal, 480 x 640 Pixel TFT, Color
• Operating Time (full charged battery, delivered power supply, 77° F (25° C)) : Approx. 3 Hours
• Data Transmission (USB)
• Technology : USB
• Maximum Transfer Rate : 115200 Baud
• Computer, Minimum Requirements (Computer Not Included)
• CD-ROM Drive : Minimum 4x
• Processor : Minimum 1.2 GHz
• Free Disk Space : Minimum 50 MB
• Interface (Data Transmission) : USB
• Working Memory (RAM) : Minimum 256 MB
• Graphic Card : Minimum 128 MB, OpenGL-Compatible
• Operating System : Windows XP, Windows Vista, Windows 7, Windows 8

Features:

• Lightweight Portability
• Live Color Coded Surveys
• Quick and Easy Set Up and Operation
• Allows for Impromptu and Fast Surveys
• Non-Intrusive Real Time Ground Surveying
• Immediate On-Site Interpretation of Target Area
• Measured Values Showing Extreme Depth of Survey
• Highly Sensitive and Accurate Metal Detecting Device
• Measured Values Showing Location of Targets within Surveyed Area

Control unit

• Dimensions (H x W x D): 70 x 140 x 300 mm
• Weight: approx. 1530 g
• Input voltage: 12 – 14.4 V DC, 22 W max
• Display: 1000 mcd Background lighting, 6.5" Diagonal, 640 x 480 Pixel TFT, Color, Anti-Glare
• Processor: AMD-GX, Dual-Core 1 GHz Processor, GPU 300 MHz
• Working memory (RAM): 2 GB
• Data memory: 8 GB
• Operating temperature: 0°C – 40°C
• Storage temperature: –20°C – 60°C
• Waterproof: No
• Operating time: approx. 3 hours (full charged Power Pack, 25°C)
• Air humidity: 5% – 75%
• Protection Type: IP 40
• Feedback: acoustic, visual

Data transmission

• Technology: USB
• Maximum Transfer Rate: 115200 Baud

Computer minimum requirements

• CD-ROM drive: minimum 4x
• Interface (Data transmission): USB
• Free disk space: minimum 50 MB
• Working memory (RAM): minimum 256 MB
• Graphic card: minimum 128 MB, OpenGL-compatible
• Processor: minimum 1.2 GHz
• Operating system: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10

OKM eXp 6000 Professional Plus Metal Detector
Wireless 3D Metal Detector and Ground Scanner with Touch Screen and Android Video Eye Glasses

Cutting edge technology has come to metal detectors with the world’s first 3d ground scanner. The eXp 6000 features wireless construction and can be controlled by either a touch screen, Android video eye glasses or an Android / Windows Tablet. The eXp 6000 features a multilingual control unit, GPS functionality, Telescopic Rod Assembly, and a variety of sensors. Use advanced technology to your advantage with the eXp 6000.

Features:

• Warranty : 2 Year Limited
• Total Weight : 2.98 lbs (1.35 kgs)
• 6 Operation Modes : Ground Scan, Tunnel Scan, Magnetometer, Mineral Scan, Pin Pointer and Live Scan
• Touch Screen : Next to a Multi-Function Control Knob the Operator may use the Built-In Touch Screen of the eXp 6000. Thus Operating the Ground Scanner is Simple and Fast
• Visualizer 3D : For Detailed In-Depth Analysis of Conducted Ground Scans, the eXp 6000 Offers the Option to Transfer its Data via USB Stick to a Computer with Visualizer 3D Software
• Wireless Technology : Easy Handling without any Cables by Using Wireless WiFi Technology. All Probes are Transmitting Data Wirelessly to Telescopic Rod Assembly and Control Unit
• GPS Navigation : Treasure Hunters who Conduct Many Scans May Enable the Internal GPS Tracker to Log GPS Coordinates along with the Scan Values. Thus they can Easily Find Back to the Measured Area
• Multilingual GUI : Offers a Graphical User Interface (GUI) with Many Different Languages to Support Best Understanding to its Operators. All Menu Elements and Dialogs are Translated into More than 12 Languages

Powerful Treasure Hunting Ground Scanner with 3D Scan Images

The eXp 6000 ground scanner is OKM's top of the line 3d metal detector, an ultra-modern geophysical detection instrument to locate buried artifacts, lost treasures, subsurface anomalies, underground utilities as well as other hidden structures. It provides nondestructive examination methods to render graphical images of subterranean targets before excavation.

Based on practical experiences with the ancestors eXp 4500 and eXp 5000, the revolutionary release of the eXp 6000 ground scanner opens up new opportunities for serious treasure hunters, gold seekers, archaeologists, prospectors, ground research companies and metal detecting enthusiasts.

The eXp 6000 ground scanner is a perfect detection device with penetration depths high beyond usual metal detectors to locate buried subsurface anomalies. This 3d metal detector can be used for the following tasks and applications:

• Prospecting Natural Gold Minerals
• Pinpointing Valuable Artifacts and Treasure Finds
• Ground Surveying Battlefields, Historic Settlements and Ancient Sanctuaries
• Treasure Hunting of Buried Artifacts and Metal Items Made of Gold, Silver, Copper and Bronze
• Detection of Underground Non-Metal Anomalies like Walls, Foundations, Statues, Ancient Tombs, Caves, Sepulchers, Chambers, etc.

All components of the eXp 6000 including control unit, telescopic rod assembly and measuring probes are completely wireless and will connect to each other via WiFi. The integrated GPS receiver, that can be activated by the user, is able to store GPS coordinates along with the measured values. Thus you can use the GPS navigation features of the eXp 6000 to locate the areas of your recorded scans easily, even after a long time between ground survey and scan analysis.

---

Measuring Probes

The eXp 6000 metal detector comes with a variety of specialized measuring probes. Each measuring probe is equipped with an orientation sensor (gyroscope) that assists in conducting scan images of high quality. By keeping track of the probe's orientation the operator can immediately correct inclinations of the connected measuring probe while scanning the underground. The user will get a visual indication directly onto the screen or video eye glasses of the eXp 6000 as well as an acoustical signal.

Telescopic Probe This very new and unique ground scanning probe was invented by OKM to reduce the amount of scanning probes as used with previously eXp detectors. Now the treasure hunter will utilize one single horizontal GPR probe that can be extended from 50 cm to 120 cm scanning width.

Super Sensor As the name of this measuring probe already implies, the Super Sensor is one of the most versatile ground scanning probe that can be used for additional operating modes like Pin Pointer (with metal discrimination) and Mineral Scan (detection of natural gold occurrences).

LiveStream Sensor Due to its complex sensor design the LiveStream Sensor is operated to get a direct view into the underground. The measuring data will be streamed onto the display or the video eye glasses of the eXp 6000 to locate hidden objects and underground structures. Thus the operator of the metal detector receives quick information regarding what is buried beneath his feet in the underground soil.

Tunnel Sensor The Tunnel Sensor has been designed to locate underground hollow spaces like tunnels, caves, sepulchers, dugouts, bunkers, shelters, tombs and the like. Thus it can be used to detect non-metallic changes within the subsurface soil.

Orientation Sensor Each measuring probe is equipped with an orientation sensor to assist you in conducting scan images of high quality. This will help to keep your probe level to the ground.	Wireless Technology Easy handling without any cables by using wireless WiFi technology. All probes are transmitting data wirelessly to telescopic rod assembly and control unit.
Multilingual GUI The eXp 6000 offers a graphical user interface (GUI) with many different languages to support best understanding to its operators. All menu elements and dialogs are translated into more than 12 languages.	Livestream The LiveStream Sensor allows an immediate view into the underground soil and its hidden treasures. It is perfectly used in conjunction with Android video eye glasses.
Layout Selection The eXp 6000 control unit contains several layouts and color schemes to optimize the work under extreme light conditions like bright sunlight or dark night.	Visualizer 3D For detailed in-depth analysis of conducted ground scans, the eXp 6000 offers the option to transfer its data via USB stick to a computer with Visualizer 3D software.
Touch Screen Next to a multi-function control knob the operator may use the built-in touch screen of the eXp 6000. Thus operating the ground scanner is simple and fast.

Operating Modes

The eXp 6000 supports different operating modes that can be used to detect underground treasures, artifacts, facilities and voids. Depending on the operator's task or application the appropriate operating mode has to be used in conjunction with one of the measuring probes.

Ground Scan The Ground Scan operating mode can be considered as the most important function. The operator can use all available measuring probes to create a full ground scan of a scan area. The resulting scan image can be stored into the metal detector's control unit for additional analyses. Simply transfer the data via USB stick to a Windows computer to utilize the Visualizer 3D software for in-depth analysis like position determination, depth and size measurements as well as signal corrections.	Tunnel Scan The Tunnel Scan functionality is intended for all operators who are looking for voids, caves, chambers, tombs, tunnels and the like. This operating mode can only be used with the Tunnel Sensor to highlight potential places of non-metallic objects and anomalies.	Magnetometer Operators looking for ferrous metals like iron, iron oxide, stainless steel or alloys of iron with other metals will use the operating mode Magnetometer. This function indicates the presence of ferrous metals in an audio-visual way. Furthermore it can be used to clean ferrous contaminated areas before conducting ground scans for precious non-ferrous metals like gold, silver, copper or bronze.
Mineral Scan For prospectors and gold seekers the Mineral Scan operating mode comes into focus. This function is operated with the Super Sensor to locate underground deposits of natural minerals like gold.	Pin Pointer The Pin Pointer operating mode utilizes the Super Sensor to pinpoint the exact location of detected objects. It also gives some kind of indication concerning the type of metal (ferrous vs. non-ferrous).	Live Scan The Live Scan operating mode can be used in conjunction with the LiveStream Sensor only. The detectorist will receive scan information streamed directly onto the screen or video eye glasses of the eXp 6000.

Wireless Android Devices (Glasses and Tablet PC)

Alternatively to the folding display, the operator of the eXp 6000 ground scanner can connect any modern Android Tablet PC or Android video eye glasses by WiFi. This can be necessary to either replace the display or to allow some additional user(s) to watch alongside while the operator is using the detector. Especially the video eye glasses can support your work by bringing the screen information closer to the user's eyes and reduces the light emission of the standard display.

Both alternatives are also very helpful while giving a technical demonstration of the eXp 6000 metal detector or supervising the operator's work.

Visualizer 3D - 3D Visualization Software for eXp 6000 Ground Scanner

For additional in-depth analysis of conducted ground scans the user of the eXp 6000 ground scanner can transfer the stored scan images to an USB stick. Then those files can be opened by OKM's Visualizer 3D software to optimize, measure and improve the recorded scan data. The visualization software already proved its capabilities. Many treasure finds, buried artifacts as well as other hidden objects have been located by evaluating measurements with Visualizer 3D.

The following functionality is included in the Visualizer 3D software:

• Color Filtering
• Selection of Pre-Configured Soil Types for Depth Measurement
• Variable Render and Display Options (wireframe, resolution, colors...)
• View GPS Location in Google Maps (browser and internet connection required)
• Measuring Position, Size and Depth of Localized Treasures, Artifacts and the Like
• Characterize Scan Images with Details like Description, Area Dimensions and Soil Conditions
• Automatic and Manual Correction of Erroneous Signals (caused by probe inclination during recording)

Graphical 3D View The graphical 3d representation indicates the existence of buried objects that have been detected underground.	Depth Measurement By selecting the anomaly within the graphical view the operator can easily measure its current depth.	GPS Location All ground scans that contain valid GPS information can transform the scan field position into Google Maps.
Multilingual GUI The graphical user interface (GUI) of the Visualizer 3D software comes in many different languages to support the user in the most efficient way.	Interpolation Filter Some filter options like interpolation can improve the quality of the ground scan to better find hidden objects.	Error Correction In case of recording errors (probe inclination, wrong rotation...) the 3d software utilizes error correction features.

The indicated technical specifications of the eXp 6000 ground scanner and 3d metal detector are average values only. While operating the eXp 6000 and its accessories as well as by future improvements these values may change.

Technical Specifications:

• 2 Year Warranty
• Control Unit : The Control Unit of the eXp 6000 is Powered by Wireless Power
  Packs and is the Main Controller of the Complete Ground Scanning System
• Waterproof : No
• Safety Class : IP40
• Air Humidity : 5 % - 75 %
• Weight : 2.98 lbs (1.35 kgs)
• Feedback : Acoustic, Visual
• Voltage : 11.8 - 14.8 VDC, 30 W Maximal
• Data Transmission Rate : 11 Mbps – 54 Mbps
• Working Memory (RAM) : 4 GB Kingston HyperX
• Data Memory : 16 GB Industrial SDCard, Class 10
• Storage Temperature : -4° F - 140° F (-20° C - 60° C)
• Operating Temperature : 14° F - 122° F (-10 °C – 50 °C)
• Operation Distance (line of sight to probe) : Max. 30 m
• Display : 6.5" Diagonal, 1024 x 768 Pixel TFT Color, 650 cd/qm
• Data Transmission Technology : WiFi 802.11n a/b/g, MIMO 2x2
• Dimensions (H x W x D) : 8.6" x 6.3" x 11.6" (220 x 160 x 295 mm)
• Computer : QuadCore AMD @ 2GHz, OpenGL4.2 HD Radeon GPU
• Operating Time (fully charged Power Pack, 77 °F (25 °C)) : Approx. 3 Hours
• Computer, Minimum Requirements (Computer Not Included)
• CD-ROM Drive : Minimum 4x
• Processor : Minimum 1.5 GHz
• Port (Data Transmission) : USB
• Free Memory : Minimum 50 MB
• Working Memory (RAM) : Minimum 512 MB
• Graphic Card : Minimum 256 MB, OpenGL-Compatible
• Operating System : Windows Vista, Windows 7, Windows 8, Windows 10
• Super Sensor
• Length : 39" (100 cm)
• Weight : About 1.7 lbs (770 g)
• Sensor Technology : TCFX-01-A
• Receiver : Dual / Hi-Gain – Vertical - Geophysical Phase Reader – EMSR
• Telescopic Probe
• Weight : About 2.2 lbs (1 kg)
• Length : 19" - 47" (50 - 120 cm)
• Sensor Technology : TCFX-01-A
• Receiver : Dual Geophysical Phase Reader – EMSR
• Tunnel Sensor
• Length : 19" (50 cm)
• Weight : About 1.15 lbs (520 g)
• Sensor Technology : TCFX-01-A
• Receiver : Dual Geophysical Phase Reader – EMSR
• LiveStream Sensor
• Length : 19" (50 cm)
• Weight : About 1.8 lbs (820 g)
• Sensor Technology : TCFX-01-A
• Receiver : Quad Geophysical Phase Reader – EMSR
• GPS Receiver / eGPS
• Cold Start : 60 s
• Warm Start : 1 s
• Input Voltage : 5 V DC
• Data Transfer Rate : 1 s
• Weight : About .13 lbs (60 g)
• Input Current (typical) : 46 mA
• Input Current (maximum) : 350 mA
• Dimensions : 2" x 2" x .78" (50 x 50 x 20 mm)

Features:

• Detection of Metals, Cavities, Gold and Buried Objects
• Includes 4 Sensors : Telescopic Probe, Super Sensor, LiveStream Sensor and Tunnel Sensor
• 6 Operation Modes : Ground Scan, Tunnel Scan, Magnetometer, Mineral Scan, Pin Pointer and Live Scan
• Touch Screen : Next to a Multi-Function Control Knob the Operator may use the Built-In Touch Screen of the eXp 6000. Thus Operating the Ground Scanner is Simple and Fast
• Layout Selection : The eXp 6000 Control Unit Contains Several Layouts and Color Schemes to Optimize the Work under Extreme Light Conditions like Bright Sunlight or Dark Night
• Orientation Sensor : Each Measuring Probe is Equipped with an Orientation Sensor to Assist in Conducting Scan Images of High Quality. Will Help to Keep Probe Level to the Ground
• Visualizer 3D : For Detailed In-Depth Analysis of Conducted Ground Scans, the eXp 6000 Offers the Option to Transfer its Data via USB Stick to a Computer with Visualizer 3D Software
• Wireless Technology : Easy Handling without any Cables by Using Wireless WiFi Technology. All Probes are Transmitting Data Wirelessly to Telescopic Rod Assembly and Control Unit
• LiveStream : The LiveStream Sensor Allows an Immediate View into the Underground Soil and its Hidden Treasures. It is Perfectly Used in Conjunction with Android Video Eye Glasses
• Telescopic Probe : One of the Unique OKM Inventions is this Measuring Probe. The Telescopic Probe can be Extended or Shortened to Different Lengths to Scan even Large Areas in Short Time
• GPS Navigation : Treasure Hunters who Conduct Many Scans May Enable the Internal GPS Tracker to Log GPS Coordinates along with the Scan Values. Thus they can Easily Find Back to the Measured Area
• Multilingual GUI : Offers a Graphical User Interface (GUI) with Many Different Languages to Support Best Understanding to its Operators. All Menu Elements and Dialogs are Translated into More than 12 Languages

Ground Penetrating Radar with Android Tablet PC.

The Gepard GPR is a very flexible, transportable and powerful ground penetrating radar for detecting underground items like pipelines, cavities, cables, conduits, tunnels, bunkers, foundations and the like. The Gepard ground penetrating radar uses an omni-directional unshielded transmission system to reach maximum depths up to 40 meters deep. This light, agile and compact unit can be easily operated by a single operator.

Ground Penetrating Radar with Android Tablet PC

The RADAR (Radio Detection and Ranging) sends a signal into the ground and awaits the reflection or echo of the signal to detect sub-surface anomalies, like the following:

• Secret Tunnels, Bunkers and Shelters
• Hidden Cavities, Graves and Sepulchers
• Buried Treasure Chests, Statues and Caches
• Buried Pipelines, Conduits and Cable Harnesses
• Back-Filled Wells, Galleries, Trenches and Dugouts
• Water Level and Underground Rivers and Aquifers
• Septic Tanks, Distribution Boxes and Drainage Pipes
• Underground Walls, Basements and Concrete Reinforcements

The Gepard ground penetrating radar is using a multiple transmission frequency range starting at 60 MHz up to 300 MHz which is realized by adjustable telescopic antennas. It furthermore supports many automatic adjustments to optimize your ground surveys on specific soil types, which makes the handling of the Gepard ground radar very easy. You just set your depth resolution and start surveying.

The measured data of the ground penetrating radar is directly transferred to an Android Tablet PC. The Android software receives the data via Bluetooth and displays it immediately on screen.

The software has the capability of integrating a GPS signal, Google Maps, automatic filtering and entering notes for later recollection of specific scan details. Additionally, automatic filtering capabilities are useful to improve the results of your scan and find hidden objects and structures more easily. Due to the integrated GPS all scan positions can be stored along with the scan data.

Optional Accessories:

60 MHz GPR Antenna: The extremely robust 60 MHz antenna allows geophysical measurements up to great depths. This optional GPR antenna penetrates much deeper than the 100 MHz antenna and is especially used to detect larger objects which are lying deeper under the ground surface.

100 MHz GPR Antenna: The 100 MHz antenna is not only robust and stable but also capable to perform high resolution measurements. In contrast to the 60 MHz antenna, the 100 MHz antenna is particularly good for finding small subsurface objects.

OKM Power Pack: Instead of using AAA batteries you are also able to use the Power Pack to operate the "Gepard GPR" ground penetrating radar. In that way you can operate your ground radar up to 10 hours continuously without changing the batteries every 3 hours.

Technical Specifications:

• 2 Year Warranty
• Control Unit
• Waterproof : No
• Indications : LED
• Weight : 3.7 lbs (1.7 kgs)
• Air Humidity : 5 % - 75 %
• Feedback : Audible, Visual
• Multi-Function Control : Yes
• Timing / Sampling : 16 Levels
• Complete Cycle : 9 per Second
• External Power Pack : Yes (Optional)
• Voltage : 9.6-13.2 VDC, 18 W Maximal
• Operating Time (AA Batteries) : Approx. 6 Hours
• Transmission Frequency Range : 60 MHz-300MHz
• Storage Temperature : -13 °F - 158 °F (-25 °C - 70 °C)
• Operating Temperature : -4 °F - 122 °F (-20 °C - 50 °C)
• Operating Time (OKM Power Pack) : Approx. 10 Hours
• Operating Time (Accumulator Batteries) : Approx. 3 Hours
• Dimensions (H x W x D) : 13" x 7" x 2" (350 x 182 x 60 mm)
• Data Transmission (Bluetooth)
• Technology : Bluetooth
• Max Transfer Rate : 1 Mbps
• Receiving Sensitivity : -85 dBm
• Max Range : Approx. 32' (10 m)
• Frequency : 60 MHz up to 300 MHz

Features:

• Flexible and Transportable
• Reaches Depths up to 131' Deep (40 m)
• Detects Underground Items like Pipelines, Cables. etc.
• Simple to Use - Just Set your Depth Resolution and Start Surveying
• Measured Data is Directly Transferred to an Android Tablet PC via Bluetooth
• Software is Capable of Integrating a GPS Signal, Google Maps, Automatic Filtering and Entering Notes for Later Recollection of Specific Scan Details

OKM eXp 6000 Professional Metal Detector
Wireless 3D Metal Detector and Ground Scanner with Touch Screen

Cutting edge technology has come to metal detectors with the world’s first 3d ground scanner. The eXp 6000 features wireless construction and can be controlled by either a touch screen, Android video eye glasses or an Android / Windows Tablet. The eXp 6000 features a multilingual control unit, GPS functionality, Telescopic Rod Assembly, and a variety of sensors. Use advanced technology to your advantage with the eXp 6000.

Features:

• Warranty : 2 Year Limited
• Total Weight : 2.98 lbs (1.35 kgs)
• 6 Operation Modes : Ground Scan, Tunnel Scan, Magnetometer, Mineral Scan, Pin Pointer and Live Scan
• Touch Screen : Next to a Multi-Function Control Knob the Operator may use the Built-In Touch Screen of the eXp 6000. Thus Operating the Ground Scanner is Simple and Fast
• Visualizer 3D : For Detailed In-Depth Analysis of Conducted Ground Scans, the eXp 6000 Offers the Option to Transfer its Data via USB Stick to a Computer with Visualizer 3D Software
• Wireless Technology : Easy Handling without any Cables by Using Wireless WiFi Technology. All Probes are Transmitting Data Wirelessly to Telescopic Rod Assembly and Control Unit
• GPS Navigation : Treasure Hunters who Conduct Many Scans May Enable the Internal GPS Tracker to Log GPS Coordinates along with the Scan Values. Thus they can Easily Find Back to the Measured Area
• Multilingual GUI : Offers a Graphical User Interface (GUI) with Many Different Languages to Support Best Understanding to its Operators. All Menu Elements and Dialogs are Translated into More than 12 Languages

Factory Included Accessories

• (1) USB Stick
• (2) Power Pack
• (1) Super Sensor
• (1) Telescopic Probe
• (1) Wireless Headphones
• (1) eXp 6000 Control Unit
• (1) Telescopic Rod Assembly
• (1) 3D Software (Visualizer 3D)
• (1) Waterproof and Shock Resistant Peli Case
• (2) Charger, Docking Station and Travel Adapter
• *(Optional) Tunnel Sensor
• *(Optional) LiveStream Sensor
• *(Optional) Android Video Eye Glasses
• *(Optional) Android / Windows Tablet PC

Powerful Treasure Hunting Ground Scanner with 3D Scan Images

The eXp 6000 ground scanner is OKM's top of the line 3d metal detector, an ultra-modern geophysical detection instrument to locate buried artifacts, lost treasures, subsurface anomalies, underground utilities as well as other hidden structures. It provides nondestructive examination methods to render graphical images of subterranean targets before excavation.

Based on practical experiences with the ancestors eXp 4500 and eXp 5000, the revolutionary release of the eXp 6000 ground scanner opens up new opportunities for serious treasure hunters, gold seekers, archaeologists, prospectors, ground research companies and metal detecting enthusiasts.

The eXp 6000 ground scanner is a perfect detection device with penetration depths high beyond usual metal detectors to locate buried subsurface anomalies. This 3d metal detector can be used for the following tasks and applications:

• Prospecting Natural Gold Minerals
• Pinpointing Valuable Artifacts and Treasure Finds
• Ground Surveying Battlefields, Historic Settlements and Ancient Sanctuaries
• Treasure Hunting of Buried Artifacts and Metal Items Made of Gold, Silver, Copper and Bronze
• Detection of Underground Non-Metal Anomalies like Walls, Foundations, Statues, Ancient Tombs, Caves, Sepulchers, Chambers, etc.

All components of the eXp 6000 including control unit, telescopic rod assembly and measuring probes are completely wireless and will connect to each other via WiFi. The integrated GPS receiver, that can be activated by the user, is able to store GPS coordinates along with the measured values. Thus you can use the GPS navigation features of the eXp 6000 to locate the areas of your recorded scans easily, even after a long time between ground survey and scan analysis.

---

Measuring Probes

The eXp 6000 metal detector comes with a variety of specialized measuring probes. Each measuring probe is equipped with an orientation sensor (gyroscope) that assists in conducting scan images of high quality. By keeping track of the probe's orientation the operator can immediately correct inclinations of the connected measuring probe while scanning the underground. The user will get a visual indication directly onto the screen or video eye glasses of the eXp 6000 as well as an acoustical signal.

Telescopic Probe This very new and unique ground scanning probe was invented by OKM to reduce the amount of scanning probes as used with previously eXp detectors. Now the treasure hunter will utilize one single horizontal GPR probe that can be extended from 50 cm to 120 cm scanning width.

Super Sensor As the name of this measuring probe already implies, the Super Sensor is one of the most versatile ground scanning probe that can be used for additional operating modes like Pin Pointer (with metal discrimination) and Mineral Scan (detection of natural gold occurrences).

LiveStream Sensor Due to its complex sensor design the LiveStream Sensor is operated to get a direct view into the underground. The measuring data will be streamed onto the display or the video eye glasses of the eXp 6000 to locate hidden objects and underground structures. Thus the operator of the metal detector receives quick information regarding what is buried beneath his feet in the underground soil.

Tunnel Sensor The Tunnel Sensor has been designed to locate underground hollow spaces like tunnels, caves, sepulchers, dugouts, bunkers, shelters, tombs and the like. Thus it can be used to detect non-metallic changes within the subsurface soil.

Orientation Sensor Each measuring probe is equipped with an orientation sensor to assist you in conducting scan images of high quality. This will help to keep your probe level to the ground.	Wireless Technology Easy handling without any cables by using wireless WiFi technology. All probes are transmitting data wirelessly to telescopic rod assembly and control unit.
Multilingual GUI The eXp 6000 offers a graphical user interface (GUI) with many different languages to support best understanding to its operators. All menu elements and dialogs are translated into more than 12 languages.	Livestream The LiveStream Sensor allows an immediate view into the underground soil and its hidden treasures. It is perfectly used in conjunction with Android video eye glasses.
Layout Selection The eXp 6000 control unit contains several layouts and color schemes to optimize the work under extreme light conditions like bright sunlight or dark night.	Visualizer 3D For detailed in-depth analysis of conducted ground scans, the eXp 6000 offers the option to transfer its data via USB stick to a computer with Visualizer 3D software.
Touch Screen Next to a multi-function control knob the operator may use the built-in touch screen of the eXp 6000. Thus operating the ground scanner is simple and fast.

Operating Modes

The eXp 6000 supports different operating modes that can be used to detect underground treasures, artifacts, facilities and voids. Depending on the operator's task or application the appropriate operating mode has to be used in conjunction with one of the measuring probes.

Ground Scan The Ground Scan operating mode can be considered as the most important function. The operator can use all available measuring probes to create a full ground scan of a scan area. The resulting scan image can be stored into the metal detector's control unit for additional analyses. Simply transfer the data via USB stick to a Windows computer to utilize the Visualizer 3D software for in-depth analysis like position determination, depth and size measurements as well as signal corrections.	Tunnel Scan The Tunnel Scan functionality is intended for all operators who are looking for voids, caves, chambers, tombs, tunnels and the like. This operating mode can only be used with the Tunnel Sensor to highlight potential places of non-metallic objects and anomalies.	Magnetometer Operators looking for ferrous metals like iron, iron oxide, stainless steel or alloys of iron with other metals will use the operating mode Magnetometer. This function indicates the presence of ferrous metals in an audio-visual way. Furthermore it can be used to clean ferrous contaminated areas before conducting ground scans for precious non-ferrous metals like gold, silver, copper or bronze.
Mineral Scan For prospectors and gold seekers the Mineral Scan operating mode comes into focus. This function is operated with the Super Sensor to locate underground deposits of natural minerals like gold.	Pin Pointer The Pin Pointer operating mode utilizes the Super Sensor to pinpoint the exact location of detected objects. It also gives some kind of indication concerning the type of metal (ferrous vs. non-ferrous).	Live Scan The Live Scan operating mode can be used in conjunction with the LiveStream Sensor only. The detectorist will receive scan information streamed directly onto the screen or video eye glasses of the eXp 6000.

Wireless Android Devices (Glasses and Tablet PC)

Alternatively to the folding display, the operator of the eXp 6000 ground scanner can connect any modern Android Tablet PC or Android video eye glasses by WiFi. This can be necessary to either replace the display or to allow some additional user(s) to watch alongside while the operator is using the detector. Especially the video eye glasses can support your work by bringing the screen information closer to the user's eyes and reduces the light emission of the standard display.

Both alternatives are also very helpful while giving a technical demonstration of the eXp 6000 metal detector or supervising the operator's work.

Visualizer 3D - 3D Visualization Software for eXp 6000 Ground Scanner

For additional in-depth analysis of conducted ground scans the user of the eXp 6000 ground scanner can transfer the stored scan images to an USB stick. Then those files can be opened by OKM's Visualizer 3D software to optimize, measure and improve the recorded scan data. The visualization software already proved its capabilities. Many treasure finds, buried artifacts as well as other hidden objects have been located by evaluating measurements with Visualizer 3D.

The following functionality is included in the Visualizer 3D software:

• Color Filtering
• Selection of Pre-Configured Soil Types for Depth Measurement
• Variable Render and Display Options (wireframe, resolution, colors...)
• View GPS Location in Google Maps (browser and internet connection required)
• Measuring Position, Size and Depth of Localized Treasures, Artifacts and the Like
• Characterize Scan Images with Details like Description, Area Dimensions and Soil Conditions
• Automatic and Manual Correction of Erroneous Signals (caused by probe inclination during recording)

Graphical 3D View The graphical 3d representation indicates the existence of buried objects that have been detected underground.	Depth Measurement By selecting the anomaly within the graphical view the operator can easily measure its current depth.	GPS Location All ground scans that contain valid GPS information can transform the scan field position into Google Maps.
Multilingual GUI The graphical user interface (GUI) of the Visualizer 3D software comes in many different languages to support the user in the most efficient way.	Interpolation Filter Some filter options like interpolation can improve the quality of the ground scan to better find hidden objects.	Error Correction In case of recording errors (probe inclination, wrong rotation...) the 3d software utilizes error correction features.

The indicated technical specifications of the eXp 6000 ground scanner and 3d metal detector are average values only. While operating the eXp 6000 and its accessories as well as by future improvements these values may change.


SPECIFICATION : 

Control Unit

• Dimensions (H x W x D): 120 x 210 x 280 mm
• Weight: approx. 2.34 kg
• Voltage: 11.8 - 19 VDC, 50 W maximal
• Safety Class: IP40
• Operating Time (full charged, 25 °C): approx. 4 hours
• Operating Temperature: -10 °C – 50 °C
• Display: 6.5” Diagonal, 1024 x 768 Pixel TFT Color, 650 cd/qm
• Processing Unit: QuadCore AMD @ 2GHz, OpenGL4.2 HD Radeon GPU
• Working Memory (RAM): 4 GB Kingston HyperX
• Data Memory: 8 GB SDCard, Class 10
• Feedback: acoustic, visual
• Storage temperature: -20 °C – 60 °C
• Air humidity: 5 % – 75 %
• Waterproof: No
• Data Transmission Technology: WiFi 802.11n a/b/g, MIMO 2x2
• Data Transmission Rate: 11 Mbps – 54 Mbps
• Operation Distance (line of sight to Telescopic Rod): max. 4 m

Telescopic Rod

• Dimensions (H x W x L): 210 x 135 x 680 - 1340 mm
• Weight: about 1,76 kg
• Voltage: 11.8 - 19 VDC, 22 W maximal
• Safety Class: IP40
• Operating Time (full charged, 25 °C): approx. 5 hours
• Operating Temperature: -10 °C – 50 °C
• Processing Unit: ARM Cortex M0 @ 48 MHz
• Working Memory (RAM): 32 KB
• Data Memory: 256 KB
• Storage temperature: -20 °C – 60 °C
• Air humidity: 5 % – 75 %
• Waterproof: No
• Data Transmission Technology: WiFi 802.11n a/b/g
• Data Transmission Rate: 11 Mbps – 54 Mbps
• Operation Distance: (line of sight to Control Unit): max. 4 m

Super Sensor

• Length: 950 mm
• Weight: approx. 0,94 kg
• Receiver: Dual / Hi-Gain – Vertical - Geophysical Phase Reader – EMSR
• Sensor technology: SCMI-15-D

Telescopic Probe

• Length: 820 - 1240 mm
• Weight: approx. 1,36 kg
• Receiver: Dual Geophysical Phase Reader – EMSR
• Sensor technology: SCMI-15-D

OKM Fusion Professional Plus with Tablet PC
The Professional Plus version is ideal for advanced users that need more operating features. Lightweight 3D Metal Detector & 3D Ground Scanner with telescopic rod assembly and complete functionality.

The OKM Fusion has been designed for starters in the field of 3d measurements and offers easy operation as well as advanced scanning features. The 3d ground scanner OKM Fusion supports treasure hunters, gold seekers, adventurers and archaeologists to discover lost treasures, buried artifacts, hidden places and other historical items.

The advanced professional plus version can be used in vertical and horizontal orientation and supports following operating modes:

• Ground Scan
  Conduct a graphical 3d measurement for detailed analysis on a computer.
• Live Sound
  Process an acoustical magnetic field measurement to detect ferrous metals.
• Live Scan (Multi-Sensor, Ultrasound)
  Process an instant live image while walking the scan field.

One of the new detection features is the SRIS search coil that can be used to locate short range metallic objects. This coil can be activated individually by the operator while setting up the operating modesLive Sound, Ground Scan and Live Scan (Ultrasound). The SRIS search coil can be very useful to pin point targets while digging. It is easy to detect the general position of a buried object with our 3d ground scanner and metal detector OKM Fusion but when you start digging it can be really hard to exactly match the correct spots of hidden items afterwards. By checking the excavated material with activated SRIS search coil you won't miss any small object like:

• wedding bands and engagement rings
• ear rings, brooches, bracelets and necklace
• coins, buttons, badges and pins

While scanning an unknown area and recording the measure values, the Visualizer 3D software can immediately analyze and visualize this information to display a color-coded 3d graphic of hidden objects and structures. Thus you will literally "see" all buried treasures, gold objects, archaeological artifacts and any other hidden objects before digging. Additionally, you can determine the size, position and depth of your detected items. So you know where to dig and how deep to dig to find your objects of interest.

Features:

• Bluetooth headphones
• Wireless data transfer
• Preconfigured Tablet-PC
• Data visualization with Visualizer 3D software
• New SRIS search coil for small shallow metal targets
• Well packed in a waterproof and shock resistant Pelican case

Control Unit

• Dimensions (H x W x D): 950 mm, 65 / 80 mm
• Weight: approx. 1 kg
• Processor / Main CPU: Cortex M3, 32 MHz
• Processor / Slave CPU: Cortex M0, 24 MHz
• Sample rate: 1024 values / second
• Measurement resolution: 16 bit
• Operating temperature: –10°C – 60°C
• Storage temperature: –20°C – 70°C
• Audio: Bluetooth Headphones
• Waterproof: No
• Sensor technology / Coil technology: SCMI-15-D / SRIS-18K
• Operating time: approx. 12 hours (delivered power supply, full charged battery, 25°C)
• Air humidity: 5% – 75%
• Protection Type: IP40
• Input (for Charger): 19 V DC / 3.16 A

Data Transmission

• Technology: Bluetooth 5.1
• Frequency: 2.402 – 2.480 GHz
• Maximum Transfer Rate: 1 Mbps
• Maximum Transmitting Power: 8 dBm
• Maximum Range: approx. 10 m

Computer Minimum Requirements

• Interface (data transmission): USB 2.0
• Free disk space: minimum 250 MB
• Working memory (RAM): 2 GB
• Display: 1920 x 1080
• Processor: 1.2 GHz
• Graphics card: 1 GB RAM, OpenGL 3.3
• Operating system: Windows 10