PRUFTECHNIK Vibxpert Ex Vibration Analyzer VIB 5.300 - USED
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc. VIBXPERT EX collects field data including vibration information, bearing condition, inspection and process data a
$3,280.00
Vibration analysis in explosive environments
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.
VIBXPERT EX collects field data including vibration information, bearing condition, inspection and process data and seamlessly integrates with the OMNITREND Center software platform for in-depth analysis.
The modular firmware structure allows you to upgrade the VIBXPERT EX from a route data collector to a full-blown troubleshooting device with advanced features such as coast down/run-up measurements, event recording, ODS & modal analysis and cross-channel phase measurement.
It is also possible to connect the VIBXPERT EX to protection systems via the buffered outputs. This enables you to perform additional analysis such as shaft vibration, shaft centerline plots or orbits e.g. on turbines, compressors and other turbomachinery.
As with all our data collectors and vibration analyzers, you will benefit from free software and firmware updates, and low ownership cost.
Intrinsically safe vibration analysis instrument and field balancer
Approved for ATEX Zone 1
Intuitive joystick operation (left- or right-handed)
Fast data acquisition with "trending spectra"
Robust aluminum housing
Compatible with VIBCODE transducer
Highest resolution for detailed frequency analysis
Interface to machine protection systems for further analysis
VIBXPERT® Ex – Technical data
Input
Analog, 2x Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
ICP-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range 96 dB (measurement) / 136 dB (total)
Sampling frequency up to 131 kHz per channel
Analog, 1x Thermocouple (type K)
Digital
(1 1 Pulse/Tacho), 1x
RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V
or -26 V ... 0 V
Output
Stroboscope control TTL output
Signal-Out Connection for headphones to listen to the analog input signal;
signal processing (oscilloscope)
Meas. range / Accuracy
Vibration acceleration depends on the transducer connected
Shock pulse -10 ...80 dBsv / ± 3dBsv
RPM 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1
(the lower accuracy is applicable)
Temperature type K -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Hardware
Display LCD, backlit, 1/2 VGA (480 x 320 pixel), 16 grey scales
Battery type Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time < 5 hours in the device or external with optional charging station
Charging temperature 0°C ... 50°C
Memory Internal: 64 MB RAM;
Compact Flash: 1 GB or 4 GB
Dimensions 250 x 220 x 37 mm (LxWxH)
Weight approx. 2.3 kg
IP rating IP65, dust and splash-proofed
Temperature range -10°C ... 50°C (Operation)
-20°C ... 60°C (Storage)
Intrinsic safety II 2 G Ex ib IIC T4
Vibration transducers (accessories)
VIBCODE® – type VIB 8.660-XVS
Hand-held transducer
with automatic location
identification
reliable identification of the coded measurement location
reproducible measurement conditions
intrinsic safety: II 2 G Ex ib IIC T4
Industrial accelerometer – type VIB 6.142 DEX
Mobile industrial
accelerometer for
standard machines
machine vibration & roller bearing condition
(shock pulse)
medium and high rotational speed (> 600 rpm)
magnetic, bonded or threaded mounting
Marking, gas explosion protection
Dust explosion
II 2 G Ex ib IIC T4
II 2 D Ex ibD 21 T187°C
Industrial accelerometer – type VIB 6.147 EX
Mobile industrial
accelerometer for
‘low-speed’ machines
machine vibration
low rotational speed (> 120 rpm)
magnetic, bonded or threaded mounting
Marking, gas explosion protection
Dust explosion
II 2 G Ex ib IIC T4
II 2 D Ex ibD 21 T187°C
VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.
VIBXPERT EX collects field data including vibration information, bearing condition, inspection and process data and seamlessly integrates with the OMNITREND Center software platform for in-depth analysis.
The modular firmware structure allows you to upgrade the VIBXPERT EX from a route data collector to a full-blown troubleshooting device with advanced features such as coast down/run-up measurements, event recording, ODS & modal analysis and cross-channel phase measurement.
It is also possible to connect the VIBXPERT EX to protection systems via the buffered outputs. This enables you to perform additional analysis such as shaft vibration, shaft centerline plots or orbits e.g. on turbines, compressors and other turbomachinery.
As with all our data collectors and vibration analyzers, you will benefit from free software and firmware updates, and low ownership cost.
Intrinsically safe vibration analysis instrument and field balancer
Approved for ATEX Zone 1
Intuitive joystick operation (left- or right-handed)
Fast data acquisition with "trending spectra"
Robust aluminum housing
Compatible with VIBCODE transducer
Highest resolution for detailed frequency analysis
Interface to machine protection systems for further analysis
VIBXPERT® Ex – Technical data
Input
Analog, 2x Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
ICP-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range 96 dB (measurement) / 136 dB (total)
Sampling frequency up to 131 kHz per channel
Analog, 1x Thermocouple (type K)
Digital
(1 1 Pulse/Tacho), 1x
RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V
or -26 V ... 0 V
Output
Stroboscope control TTL output
Signal-Out Connection for headphones to listen to the analog input signal;
signal processing (oscilloscope)
Meas. range / Accuracy
Vibration acceleration depends on the transducer connected
Shock pulse -10 ...80 dBsv / ± 3dBsv
RPM 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1
(the lower accuracy is applicable)
Temperature type K -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Hardware
Display LCD, backlit, 1/2 VGA (480 x 320 pixel), 16 grey scales
Battery type Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time < 5 hours in the device or external with optional charging station
Charging temperature 0°C ... 50°C
Memory Internal: 64 MB RAM;
Compact Flash: 1 GB or 4 GB
Dimensions 250 x 220 x 37 mm (LxWxH)
Weight approx. 2.3 kg
IP rating IP65, dust and splash-proofed
Temperature range -10°C ... 50°C (Operation)
-20°C ... 60°C (Storage)
Intrinsic safety II 2 G Ex ib IIC T4
Vibration transducers (accessories)
VIBCODE® – type VIB 8.660-XVS
Hand-held transducer
with automatic location
identification
reliable identification of the coded measurement location
reproducible measurement conditions
intrinsic safety: II 2 G Ex ib IIC T4
Industrial accelerometer – type VIB 6.142 DEX
Mobile industrial
accelerometer for
standard machines
machine vibration & roller bearing condition
(shock pulse)
medium and high rotational speed (> 600 rpm)
magnetic, bonded or threaded mounting
Marking, gas explosion protection
Dust explosion
II 2 G Ex ib IIC T4
II 2 D Ex ibD 21 T187°C
Industrial accelerometer – type VIB 6.147 EX
Mobile industrial
accelerometer for
‘low-speed’ machines
machine vibration
low rotational speed (> 120 rpm)
magnetic, bonded or threaded mounting
Marking, gas explosion protection
Dust explosion
II 2 G Ex ib IIC T4
II 2 D Ex ibD 21 T187°C
- Availability: 29 In Stock
- Model: Vibxpert Ex
-
Brand:
