Radiodetection
Key Features:
- Rugged yet light weight and ergonomic
- Designed and built to the highest standards in Great Britain
- Self Test for confidence and trust in your locator measurements
- Easy to deploy and use - provides fast, precise and repeatable measurements
- Industrial grade display, for outdoor usage
- RD7200 locators and transmitters use transflective low power LCD technology that uses ambient light to improve screen readability in direct sun light and extend battery life.
- TruDepth™ and current readout, for extra assurance
- Radiodetection’s TruDepth displays precise depth and current measurements, only when the RD7200 is correctly oriented above the target. Measurement consistency gives high confidence that the correct line is being followed.
- High performance audio and vibration alerts, for noisy environments
- The RD7200 waterproof speaker housing has been tuned to provide optimum resonance for your choice of high or low frequency tones.
- 5 power output audio levels and vibration alerts, assist technicians working in challenging situations.
Water and Pipeline
A wide choice of active frequencies allow conductive pipes to be traced for long distances. Where sondes or cameras are used to survey pipes made from a variety of materials (including cast iron, clay, fiber, concrete and brick) the four RD7200 sonde frequencies are ideal for quickly locating and tracing their position. Pipes with Cathodic Protection System can be followed using the CPS passive mode. CPS compass mode ensures alignment with the target pipeline.
Power
In complex power environments, with multiple signals from high voltage equipment and cables, Radiodetection’s Dynamic Overload Protection reduces the effect of interference and Power Filters can be used to trace a single target line amongst multiple cables.
Telecom
TheRD7200 features higher frequencies to locate high impedance lines and sonde frequencies for duct and conduit tracing. Higher frequencies can also be used to trace sheathed domestic cables without grounding connections.
Cable sheath faults can be located to within 4” (10cm) using 8kHz Fault Find mode with a Radiodetection A-Frame
Construction
Accurate and simple to use, the RD7200 comes with eight active and three passive frequencies that cover the majority of site locating tasks. A rugged, IP65 rated casing along with a high contrast screen make it suitable for use in all weather conditions.
| RD7200 Specifications | |
| 1. Product Summary | |
| 1.1 Product Descriptions: | Precision Buried Utility Locator Precision Cable and Pipe Locator Locate System Receiver Utility Specific Precision Locator |
| 1.2 Inteded Use: | Locating the position / path of buried pipes and cables Detecting and pinpointing insulation faults on buried pipes and cables |
| 1.3 Standard Equipment: | Locator Quickstart guide Mini USB 2.0 compliant data cable |
| 2. Performance | |
| 2.1 Sensitivity: | 6E-15 Tesla 5µA at 1 meter (33kHz) |
| 2.2 Dynamic range: | 140dB rms/√Hz |
| 2.3 Selectivity: | 120dB/Hz |
| 2.4 Depth measurement precision1 : | ± 3% |
| 2.5 Locate accuracy: | ± 5% of depth |
| 2.6 Active Locate filter bandwidth: | ± 3Hz, 0 < 1kHz ± 10Hz, ≥ 1kHz |
| 2.7 Start-up time: | Less than 1 second |
| 2.8 Maximum depth readout2: | Metric: Cable / Pipe: 30m Sonde: 19.5m Imperial: Cable / Pipe: 98' Sonde: 64' |
| 3. Locate Functions | |
| 3.1 Active Locate Modes: | Up to four, model dependent: • Peak • Peak ™ (choice of combined Peak & Guidance or Peak & Null) • Guidance • Null |
| 3.2 Gain control: | Guidance Mode: Automatic Other modes: Manual gain using “ ” or “-” with one touch to return to center (50% of Full Scale) |
| 3.3 Active frequencies: | - 512Hz - 640Hz - 8kHz - 33kHz - 65kHz - 83kHz - 131kHz - 200kHz |
| 3.4 Sonde Frequencies: | - 512Hz - 640Hz - 8kHz - 33kHz |
| 3.6 Passive Locate Modes: | - Power - Radio - CPS (Cathodic Protection System) |
SPX Radiodetection TX-5 Precision Locate Cable & Pipe 5 Watt Transmitter
Product Overview:
The Tx family of signal transmitters has been designed to complement Radiodetection’s advanced high-precision cable and pipe locators including the RD8100, RD7100, marker locator and PCM ranges
Product Description:
- Signal transmitter
- Multi-function transmitter
- Cable and pipe transmitter
Intended Use:
Use with a locator or marker locator from Radiodetection’s precision locator range to find and trace cables and pipes. Use with a PCM locator to boost the locate signal for a pipeline survey.
| Specifications | |
| Max Power Out Put | 5W |
| Max Voltage Output | 90V |
| Max Current Output | 0.5A |
| Induction Field Strength | 0.9 |
| Active Frequencies | 512Hz DC 570Hz DC 577Hz DC 640Hz DC 760Hz DC 870Hz DC 920Hz DC 940Hz DC Induction 4kHz (4096Hz) DC Induction Clamp 8kHz (8192Hz) DC Induction Clamp 9.8kHz (9820Hz) DC Induction Clamp 33kHz (32,768Hz) DC Induction Clamp 65kHz (65,536Hz) DC Induction Clamp 83kHz (83,077Hz) DC Induction Clamp 131kHz (131,072Hz) DC Induction Clamp 200kHz DC Induction Clamp |
| Fault Find | 8kHz (8192Hz) |
| Information displayed | - Battery level indicator - Operation mode readout - Standby icon - Output level indicator - Mode of operation indication - Induction - Direct connection - Clamp mode - DC power connected indicator - A-frame: Indicates when the transmitter is in Fault-Find Mode - CD Mode: Indicates when the transmitter is in Current Direction Mode - Voltage warning indicator: Indicates that the transmitter is outputting potentially hazardous voltage levels or high voltage across DC output leads - Volume level indicator - Pairing icon: Appears when the transmitter and locator are connected via iLOC - Bluetooth icon: Indicates status of Bluetooth connection. Flashing icon means pairing is in progress - Measurements: Voltage, current, power and impedance |
INCLUDED :
- Radiodetection RD7200 Locator (BC# -L/T*)
- Radiodetection TX-5 5 Watt Transmitter (-L/T)
Precision Locator Range
Damage prevention and operational efficiency are the biggest challenges facing our customers
Solve these problems with the new RD8200. Designed with the operator in mind, it is our most advanced and capable range of precision locators.
Speed, accuracy and reliable performance
- Easy to setup and use
- Sun light readable display, high performance audio system and vibration alerts for noisy environments
- Sensitive and accurate signal processing for reliable results
Adaptable in challenging environments
- Ideal for congested underground infrastructures
- Rejects strong interfering signals
- Identify target power cable in the presence of many
Technology driven best on-site practise
- Encourage correct locator handling for improved detection
- Monitor field operations through the automatic usage logging feature
- Proof of work to differentiate your operations from your competition and add value to your clients
Ergonomic design, premium quality
- Rugged yet light weight and ergonomic
- Designed and built to the highest standards in Great Britain
- Self Test for confidence and trust in your locator measurements
Key Features
- Part of the Radiodetection Cable and Pipe Locator range
- Highly versatile instrument
- Suitable for a vast array of tasks
- Multi-industry tool including construction, power and telecom
- Produces reliable and consistent results
- On-screen TruDepth and Current readout
- 21 active and 5 custom frequencies
- 4 passive modes including Peak mode
- Features Guidance and Null functions
- Current Direction guiding capability
- 4 sonde frequencies & power filters
- 4kHz frequency for long distance tracing
- Dynamic Overload Protection safety feature
- SideStep interference evasion included
- Rejects strong interfering signals
- Bluetooth low energy, iLoc and survey measurements features
- StrikeAlert notifies operators of shallow cables
- Self-test function for on-site peace of mind
- LCD technology for use in various ambient light levels
- Compass orientation provided
- Visual and audible alert system
- Swing Warning System for ensuring correct usage
- Vibrating handle so users can concentrate on the task at hand
- Five precision ground antennas
- Designed for every day
- Lightweight and ergonomic build
- High-visibility reflective design
- Rechargeable Li-Ion battery
- Rated IP65
Accessories
CARRYING CASE
SIGNAL CLAMPS AND CABLES
GROUND STAKE
BATTERY CHARGER
QUICK START GUIDE
Usage-logging with GPS positioning, understand how your technicians operate
The RD8200G locator automatically stores all locate parameters providing a comprehensive picture of field operations.
Supervisors or health and safety personnel can analyze the data to assess usage patterns in order to ensure adherence to best-practice and to identify training needs before poor work habits develop.
The information can also be shared with partners or clients to evidence task completion or compliance to service requirements.
Usage data can be exported in multiple file formats – for example KML for Google Maps to confirm where and when work was performed.
Industrial grade display, for outdoor usage
RD8200 locators and transmitters use transflective low power LCD technology that uses ambient light to improve screen readability in direct sun light and extend battery life.
TruDepth™ and current readout, for extra assurance
Radiodetection’s TruDepth displays precise depth and current measurements, only when the RD8200 is correctly oriented above the target. Measurement consistency gives high confidence that the correct line is being followed.
High performance audio and vibration alerts, for noisy environments
The RD8200 waterproof speaker housing has been tuned to provide optimum resonance for your choice of high or low frequency tones.
5 power output audio levels and vibration alerts, assist technicians working in challenging situations.
Current Direction, track the right line
Identify your target amongst a number of parallel utilities by applying a specialized CD signal from a Tx-10 transmitter. CD arrows displayed on the locator confirm you are tracing your target line.
Power Filters™, works where other locators wont
When a transmitter can’t be connected, tracing individual power lines through dense networks can be a real challenge. Conflicting or powerful signals confuse or combine to create a wash of signal.
A single key press enables the use of the harmonic properties of power signals to establish if a signal comes from one source, or from multiple cables which you can then trace and mark.
Dynamic Overload Protection, rejects unwanted interference
Automatically filters out interference, enabling use in electrically noisy environments such as near substations or overhead power lines.
Swing Warning System, drives correct usage
Locators must be kept perpendicular to the ground for best accuracy. RD8200 locators have a built-in gyroscopic measurement system which alerts the user of excessive swing, driving correct usage.
Made in the UK – No compromise on quality
The RD8200 locator and transmitters are designed and manufactured in the Great Britain and are subjected to a rigorous test regime before leaving our factory.
Locate with confidence - Self-test
Confirm the integrity of the measurement system on- site. Self-test applies signals to the locating circuitry as well as checking display and power functions.
Use it all day, day after day -Light weight and ergonomic
The RD8200 has been design around the operator needs. The iconic industrial design provides an exceptionally well balanced, and light weight tool which is comfortable for extended periods of use.
Includes:
Power (Filters)
Radio
CPS
CATV
21 Active Frequencies
4 Sonde Frequencies
Current Direction
Fault Find
GPS
- 1