PRUFTECHNIK Vibxpert II Vibration Analyzer - USED
The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
$1,626.00
Specifications:
Input
Analog, Vibration, 2x : Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range : DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range : 96 dB (measurement) / 136 dB (total)
Sampling frequency : up to 131 kHz per channel
Impedance : 90 kOhm, with cable VIB 5.433
Analog, Temperature, 1x : Thermocouple (type K)
Digital, Pulse/ Tacho, 1x : RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage : ± 26 V
Switching threshold for 0 V ... 26 V signal : max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal : min. -8 V rising, max. -10 V falling
Pulse width : < 0.1 ms
Output
Stroboscope control : TTL
Frequency range : 0 - 500 Hz
Resolution : 0.05 Hz
Signal-Out : Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range : 0.5 Hz - 40 kHz
Output impedance : 100 Ohm
Measurement range / Accuracy
Vibration acceleration : depends on the sensor connected
Shock pulse : -10 ...80 dBsv / ± 3dBsv
RPM : 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K : -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled : Frequency response acc to ISO 2954
Display
Type : TFT-LCD, backlit
Pixel area : 116 x 87 mm
Resolution : VGA (640 x 480 pixel) with 140 ppi
Color depth : 18 bit (262144 colors)
Power supply
Battery type : Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time : < 5 hours in the instrument
Charger, input : 110-240 V / 50-60 Hz
Charging temperature : 0°C ... 50°C [ 32 °F ... 122°F]
Computer
Processor : Marvell PXA320 806 MHz
Keyboard : 1 navigation pad and 7 keys (Zoom, Escape, Function, Help, Menu, On/Off); Keyboard illumination controlled by ambient light.
Memory : Internal: 128 MB DDR RAM; Compact Flash: 2 GB to 8 GB (interchangeable)
Serial interface : RS 232, <115 kBaud USB interface USB 2.0
Ethernet interface : 100 Mbit (100Base T), 10 Mbit (10Base T)
Environment / General
Connectors : Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing : ABS plastics
Dimensions : 186 x 162 x 52 mm (LxWxH), [ 7 5/16" x 6 3/8" x 2 1/16" ]
Weight : approx. 1.1 kg [39 oz]
Environmental protection : IP65, dust and splash-proofed
Temperature range : -10°C ... 60°C (Operation), [ 14 °F ... 140°F]
-20°C ... 60°C (Storage), [ -4 °F ... 140°F]
INCLUDED :
- VIBXPERT II
- 2 Channels
- 2x Accelerometers with magnets
- Accelerometer for balancing
- Machine template module
- Channel balancing module
- 2x Regular sensors and low rpm sensor
- 2x Vibcode transducers
- Optical pickup
- Laser rpm
- Tiptector
- PC Transfer cable
- Accelerometer cable
- Power supply
- With inplace balancing module and laser
- Vibration sensor
Input
Analog, Vibration, 2x : Voltage (AC/DC, ±30 V max.)
Current (AC/DC, ±30 mA max.)
IEPE-type accelerometer (2 mA, 24 V max.)
Current Linedrive (CLD) accelerometer (10 V, 10 mA max.)
Frequency range : DC ... 51.2 kHz (Acceleration from 0.5 Hz)
Dynamic range : 96 dB (measurement) / 136 dB (total)
Sampling frequency : up to 131 kHz per channel
Impedance : 90 kOhm, with cable VIB 5.433
Analog, Temperature, 1x : Thermocouple (type K)
Digital, Pulse/ Tacho, 1x : RPM, Trigger, Keyphaser with pulse and AC signals: 0 V ... 26 V or -26 V ... 0 V
Max. input voltage : ± 26 V
Switching threshold for 0 V ... 26 V signal : max. 2.5 V rising, min. 0.6 V falling
Switching threshold for -26 V ...0 V signal : min. -8 V rising, max. -10 V falling
Pulse width : < 0.1 ms
Output
Stroboscope control : TTL
Frequency range : 0 - 500 Hz
Resolution : 0.05 Hz
Signal-Out : Connection for headphones to listen to the analog input signal; signal processing (oscilloscope)
Frequency range : 0.5 Hz - 40 kHz
Output impedance : 100 Ohm
Measurement range / Accuracy
Vibration acceleration : depends on the sensor connected
Shock pulse : -10 ...80 dBsv / ± 3dBsv
RPM : 10 ... 200 000 min-1 / ±0.1‰ or ± 1 min-1 (the lower accuracy is applicable)
Temperature, type K : -50 ... 1000°C / 1% or ±1°C (the lower accuracy is applicable)
Standards fulfilled : Frequency response acc to ISO 2954
Display
Type : TFT-LCD, backlit
Pixel area : 116 x 87 mm
Resolution : VGA (640 x 480 pixel) with 140 ppi
Color depth : 18 bit (262144 colors)
Power supply
Battery type : Li Ion rechargeable battery pack (7.2V / 4.8Ah - 34 Wh)
Charging time : < 5 hours in the instrument
Charger, input : 110-240 V / 50-60 Hz
Charging temperature : 0°C ... 50°C [ 32 °F ... 122°F]
Computer
Processor : Marvell PXA320 806 MHz
Keyboard : 1 navigation pad and 7 keys (Zoom, Escape, Function, Help, Menu, On/Off); Keyboard illumination controlled by ambient light.
Memory : Internal: 128 MB DDR RAM; Compact Flash: 2 GB to 8 GB (interchangeable)
Serial interface : RS 232, <115 kBaud USB interface USB 2.0
Ethernet interface : 100 Mbit (100Base T), 10 Mbit (10Base T)
Environment / General
Connectors : Analog / Digital channels: MiniSnap socket Thermocouple (type K): QLA socket; all compatible to VIBSCANNER
Housing : ABS plastics
Dimensions : 186 x 162 x 52 mm (LxWxH), [ 7 5/16" x 6 3/8" x 2 1/16" ]
Weight : approx. 1.1 kg [39 oz]
Environmental protection : IP65, dust and splash-proofed
Temperature range : -10°C ... 60°C (Operation), [ 14 °F ... 140°F]
-20°C ... 60°C (Storage), [ -4 °F ... 140°F]
INCLUDED :
- VIBXPERT II
- 2 Channels
- 2x Accelerometers with magnets
- Accelerometer for balancing
- Machine template module
- Channel balancing module
- 2x Regular sensors and low rpm sensor
- 2x Vibcode transducers
- Optical pickup
- Laser rpm
- Tiptector
- PC Transfer cable
- Accelerometer cable
- Power supply
- With inplace balancing module and laser
- Vibration sensor